Publication
Stochastic simulation of intermittent rainfall using the concept of “dry drift”
Abstract
A stochastic rainfall simulator based on the concept of “dry drift” is proposed. It is characterized by a new and nonstationary representation of rainfall in which the average rain rate (in log-space) depends on the distance to the closest surrounding dry areas. The result is a more realistic transition between dry and rainy areas and a better distribution of low and high rain rates inside the simulated rainy areas. The proposed approach is very general and can be used to simulate both unconditional and conditional rain rate time series, two-dimensional fields, and space-time fields. The parameterization is intuitive and can be done using time series and/or radar rain-rate maps. Several examples illustrating the simulator's capabilities are given. The results show that the simulated time series and rain rate fields look realistic and that they are difficult to distinguish from real observations.
Official source
About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Ontological neighbourhood
Related concepts (20)
Rain
Rain is water droplets that have condensed from atmospheric water vapor and then fall under gravity. Rain is a major component of the water cycle and is responsible for depositing most of the fresh water on the Earth. It provides water for hydroelectric power plants, crop irrigation, and suitable conditions for many types of ecosystems. The major cause of rain production is moisture moving along three-dimensional zones of temperature and moisture contrasts known as weather fronts.
Rain gauge
A rain gauge (also known as udometer, pluviometer, pluviameter, ombrometer, and hyetometer) is an instrument used by meteorologists and hydrologists to gather and measure the amount of liquid precipitation over a predefined area, over a period of time. It is used to determine the depth of precipitation (usually in mm) that occurs over a unit area and measure rainfall amount. The first known rainfall records were kept by the Ancient Greeks, at around 500 BCE.
Simulation
A simulation is the imitation of the operation of a real-world process or system over time. Simulations require the use of models; the model represents the key characteristics or behaviors of the selected system or process, whereas the simulation represents the evolution of the model over time. Often, computers are used to execute the simulation. Simulation is used in many contexts, such as simulation of technology for performance tuning or optimizing, safety engineering, testing, training, education, and video games.
Related publications (32)
Radar processing techniques to study summer snowfall in the Sør Rondane Mountains, Antarctica
Snowfall is one of the main positive contributors to the surface mass balance of the Antarctic ice sheet. There are several techniques to monitor solid precipitation on the continent. Among them, meteorological radars provide the means to characterize the ...
EPFL2022Dynamic Differential Reflectivity Calibration Using Vertical Profiles in Rain and Snow
The accuracy required for a correct interpretation of differential reflectivity (ZDR) is typically estimated to be between 0.1 and 0.2 dB. This is achieved through calibration, defined as the identification of the constant or time-varying offset to be subt ...
2020Dynamic differential reflectivity calibration using vertical profiles in rain and snow
The accuracy required for a correct interpretation of differential reflectivity (ZDR) is typically estimated to be between 0.1 and 0.2 dB. This is achieved through calibration, defined as the identification of the constant or time-varying offset to be subt ...
2020Related MOOCs (6)
Digital Signal Processing [retired]
The course provides a comprehensive overview of digital signal processing theory, covering discrete time, Fourier analysis, filter design, sampling, interpolation and quantization; it also includes a
Digital Signal Processing I
Basic signal processing concepts, Fourier analysis and filters. This module can
be used as a starting point or a basic refresher in elementary DSP
Digital Signal Processing II
Adaptive signal processing, A/D and D/A. This module provides the basic
tools for adaptive filtering and a solid mathematical framework for sampling and
quantization