Skip to main content

Search

Show all results for

Home

Publication

Digital Silicon Photonic MEMS Phase-Shifter

About
Privacy
Disclaimer

Copyright © 2025 EPFL, all rights reserved

Graph Chatbot

Niels Quack
2018

Abstract

We report on a 4-bit digital silicon photonic MEMS phase-shifter with sub-microsecond switching time and low power consumption (< 10 uW). The device consists of 4 digitally switched phase-shifting units, which in total enable phase shift from pi/8 to 15pi/8 in increments of pi/8.

Official source

https://infoscience.epfl.ch/entities/publication/1d6ba8dc-64e4-4a0c-b7aa-a168bdda910c

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts (17)

Three-phase electric power

Three-phase electric power (abbreviated 3φ) is a common type of alternating current (AC) used in electricity generation, transmission, and distribution. It is a type of polyphase system employing three wires (or four including an optional neutral return wire) and is the most common method used by electrical grids worldwide to transfer power. Three-phase electrical power was developed in the 1880s by several people. In three-phase power, the voltage on each wire is 120 degrees phase shifted relative to each of the other wires.

Phase-shift keying

Phase-shift keying (PSK) is a digital modulation process which conveys data by changing (modulating) the phase of a constant frequency carrier wave. The modulation is accomplished by varying the sine and cosine inputs at a precise time. It is widely used for wireless LANs, RFID and Bluetooth communication. Any digital modulation scheme uses a finite number of distinct signals to represent digital data. PSK uses a finite number of phases, each assigned a unique pattern of binary digits.

Low-power electronics

Low-power electronics are electronics, such as notebook processors, that have been designed to use less electric power than usual, often at some expense. In the case of notebook processors, this expense is processing power; notebook processors usually consume less power than their desktop counterparts, at the expense of lower processing power. watch The earliest attempts to reduce the amount of power required by an electronic device were related to the development of the wristwatch.

Related publications (24)

High sensitivity, incoherent differential imaging

Microscopic visualisation of optically transparent samples has been a topic of interest for several decades. Features such as density or chemical composition can influence the optical phase of transmitted light, and phase contrast can reveal these structur ...

EPFL2022

Phase Reconstruction of Low-Energy Electron Holograms of Individual Proteins

Klaus Kern, Stephan Rauschenbach, Sven Alexander Szilagyi, Hannah Julia Ochner

Low-energy electron holography (LEEH) is one of the few techniques capable of imaging large and complex three-dimensional molecules, such as proteins, on the single molecule level at subnanometer resolution. During the imaging process, the structural infor ...

AMER CHEMICAL SOC2022

Lock-in incoherent differential phase contrast imaging

Christophe Moser, Timothé Laforest, Damien Claude-Marie Loterie, Chiara Bonati

We introduce a lock-in method to increase the phase contrast in incoherent differential phase contrast (DPC) imaging. This method improves the phase sensitivity by the analog removal of the background. The use of a smart pixel detector with in-pixel signal ...

CHINESE LASER PRESS2022