Structural anelasticity, elasticity and broken ergodicity in Ni-Ti shape memory alloys
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Continuous-fiber ceramic matrix composites (CMCs) are of interest as hot-section components in gas turbine engines due to their refractoriness and low density relative to metallic alloys. In service, CMCs will be subjected to spatially inhomogeneous temper ...
A waterborne latex-based technique, in which functionalized laponite is attached to PS and acrylic latex particles, is used to prepare films containing up to 50 wt% laponite. At high laponite contents this leads to a cellular arrangement of the laponite-ri ...
With recent developments in micro and nano-technologies, mechanical components such as those used in medicine or electronics tend to be miniaturized, requiring a new set of testing techniques to study their reliability and performance. One of the new metho ...
Harmonic tension–compression tests at 0.1, 0.5 and 1 Hz on hydrated bovine periodontal ligament (PDL) were numerically simulated. The process was modeled by finite elements (FE) within the framework of poromechanics, with the objective of isolating the con ...
The aim of the thesis is to obtain more understanding about the influence of plastic deformation on the microstructural changes observed in single crystal (SX) Ni-based superalloys using diffraction techniques. This work was organised around two main probl ...
Strain response of polycrystalline barium titanate (BaTiO3) was investigated under high unipolar electric field (0 to 4 kV/mm) and compressive stress (0 to 400 MPa) in the temperature range from 25 to 160 degrees C. In the vicinity of the Curie point (T-C) ...
A three-dimensional (3-D) coupled hydromechanical granular model has been developed and validated to directly predict, for the first time, hot tear formation and stress strain behavior in metallic alloys during solidification. This granular model consists ...
In order to deeply understand the high temperature deformation behaviors of Cu-0.23%Al2O3 (volume fraction) alloy, the changes of flow stress and microstructure for this alloy after deformation at high temperatures were investigated by using the Gleeble-15 ...
A constitutive model that couples elastic-plastic and damage theories is developed to predict the mechanical behavior of a shale from the Mont Terri rock laboratory (Opalinus Clay). The framework of continuum damage mechanics allows to predict the degradat ...
Elastic storage modulus and loss of relaxor lead magnesium niobate ceramics, Pb(Mg1/3Nb2/3)O3, have been measured with dynamic mechanical analyzer in single cantilever mode in the temperature range from 170K to 320K and at frequencies from 0.1 Hz to 50 Hz. ...
