Structural anelasticity, elasticity and broken ergodicity in Ni-Ti shape memory alloys
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The aim of the thesis is to obtain more understanding about the influence of plastic deformation on the microstructural changes observed in single crystal (SX) Ni-based superalloys using diffraction techniques. This work was organised around two main probl ...
A three-dimensional (3-D) coupled hydromechanical granular model has been developed and validated to directly predict, for the first time, hot tear formation and stress strain behavior in metallic alloys during solidification. This granular model consists ...
With recent developments in micro and nano-technologies, mechanical components such as those used in medicine or electronics tend to be miniaturized, requiring a new set of testing techniques to study their reliability and performance. One of the new metho ...
Harmonic tension–compression tests at 0.1, 0.5 and 1 Hz on hydrated bovine periodontal ligament (PDL) were numerically simulated. The process was modeled by finite elements (FE) within the framework of poromechanics, with the objective of isolating the con ...
Continuous-fiber ceramic matrix composites (CMCs) are of interest as hot-section components in gas turbine engines due to their refractoriness and low density relative to metallic alloys. In service, CMCs will be subjected to spatially inhomogeneous temper ...
In order to deeply understand the high temperature deformation behaviors of Cu-0.23%Al2O3 (volume fraction) alloy, the changes of flow stress and microstructure for this alloy after deformation at high temperatures were investigated by using the Gleeble-15 ...
Strain response of polycrystalline barium titanate (BaTiO3) was investigated under high unipolar electric field (0 to 4 kV/mm) and compressive stress (0 to 400 MPa) in the temperature range from 25 to 160 degrees C. In the vicinity of the Curie point (T-C) ...
A constitutive model that couples elastic-plastic and damage theories is developed to predict the mechanical behavior of a shale from the Mont Terri rock laboratory (Opalinus Clay). The framework of continuum damage mechanics allows to predict the degradat ...
Elastic storage modulus and loss of relaxor lead magnesium niobate ceramics, Pb(Mg1/3Nb2/3)O3, have been measured with dynamic mechanical analyzer in single cantilever mode in the temperature range from 170K to 320K and at frequencies from 0.1 Hz to 50 Hz. ...
A waterborne latex-based technique, in which functionalized laponite is attached to PS and acrylic latex particles, is used to prepare films containing up to 50 wt% laponite. At high laponite contents this leads to a cellular arrangement of the laponite-ri ...
