A case study in the capacity design of RC coupled walls
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Previous studies have investigated the slab effects on the cyclic behavior of composite beams in moment-resisting frames. Of interest in this paper, is the slab contribution to the flexural strength and effective stiffness of the beam. The former influence ...
Steel lateral load-resisting systems offer a variety of design solutions to ensure a ductile behaviour of a structure during a seismic event, thereby achieving a relatively low earthquake-induced collapse risk, if designed and detailed properly according t ...
Centre suisse de la construction métallique (SZS)2019
In many countries of moderate to high seismicity, reinforced concrete (RC) core walls are used as lateral bracing systems in mid- to high-rise buildings where they typically accommodate lift shafts or stair cases. Unlike planar walls which provide horizont ...
Shortcomings exist with respect to accounting for the influence of non-structural components, e.g. gypsum panels installed on the ceilings (floors and roof diaphragms) and walls, on the response of cold-formed steel (CFS) framed structures subjected to sei ...
Reinforced concrete (RC) flat slabs supported by slender columns are often used as gravity load resisting system for buildings in regions of moderate and high seismicity. Such buildings are typically braced by RC walls, which carry the largest portion of t ...
Splicing of longitudinal reinforcement in the plastic hinge region of reinforced concrete (RC) members was common practice in buildings and bridges before the introduction of capacity design principles. Experimental and field observations showed that the p ...
Existing steel frame buildings in Switzerland that have been designed from the early 1970s typically utilized a steel lateral load resisting system with practically no seis- mic design requirements. However, Switzerland is a moderate seismicity zone and th ...
The region of Basel is considered one of the most seismically vulnerable in Switzerland: in 1356, a very damaging earthquake hit the city, which nowadays is characterized by a significant concentration of population and economic activities. Hence, the Cant ...
The seismic in-plane response of cold-formed steel (CFS) framed diaphragm structures has not been the subject of extensive study. The information available specific to diaphragm design in the North American CFS design standard is based on limited experimen ...
International Association of Earthquake Engineering2017
Glass fiber-reinforced polymer (GFRP) pultruded decks and sandwich panels currently represent two of the most extensive applications of FRP materials for load-bearing structural components in the bridge and building domains. Based on the state of the art, ...
