Publication

Assessment of a new fabrication route for Fe-9Cr-1W ODS cladding tubes

Related publications (37)

Dislocation Hardening in a New Manufacturing Route of Ferritic Oxide Dispersion-Strengthened Fe-14Cr Cladding Tube

The microstructure evolution associated with the cold forming sequence of an Fe-14Cr-1W-0.3Ti-0.3Y2O3 grade ferritic stainless steel strengthened by dispersion of nano oxides (ODS) was investigated. The material, initially hot extruded at 1100 degrees C an ...

MDPI2024

Insights into hardening, plastically deformed zone and geometrically necessary dislocations of two ion-irradiated FeCrAl(Zr)-ODS ferritic steels: A combined experimental and simulation study

Peng Song

As one of promising candidate materials for fuel claddings and structural components in the Gen-IV fission reactors, FeCrAl(Zr)-ODS ferritic steels were studied to well understand the radiation hardening behavior. Nanoindentation (NI) hardness and plastica ...

2022

Characterization of untransformed ferrite in 10Cr and 12Cr ODS steels

Roland Logé

Two new ferrito-martensitic oxide dispersion strengthened (ODS) steels reinforced with (Y, Ti, O) nanoparticles were elaborated using a high-energy attritor. The milled powder was consolidated by hot extrusion at 1050 degrees C. The two types of ODS steels ...

ELSEVIER SCI LTD2021

Experimental push-out investigation on the in-plane force-deformation behavior of integrally-attached timber Through-Tenon joints

Yves Weinand, Aryan Rezaei Rad, Henry V. Burton

Spurred by developments in digital fabrication, there has been an increase in the application of the Integral Mechanical Attachment (IMA) technique in timber plate structures. Despite its increase in popularity, there have been very few systematic investig ...

ELSEVIER SCI LTD2019

Breed-and-burn fuel cycle in molten salt reactors

Andreas Pautz, Jiri Krepel, Boris Aviv Hombourger

The operation of a reactor on an open but self-sustainable cycle without actinide separation is known as breed-and-burn. It has mostly been envisioned for use in solid-fueled fast-spectrum reactors such as sodium-cooled fast reactors. In this paper the app ...

EDP Sciences2019

Helium effects on irradiation assisted stress corrosion cracking susceptibility of 316L austenitic stainless steel

Ignasi Villacampa Roses

The formation and growth of cracks by irradiation assisted stress corrosion cracking (IASCC) in light water reactor internals is a critical issue for a safe long-term operation of nuclear power plants. The IASCC susceptibility at relatively low dose is dom ...

EPFL2018

Investigation of the relationships between mechanical properties and microstructure in a Fe-9%Cr ODS steel

Roland Logé

Ferritic-martensitic Oxide Dispersion Strengthened (ODS) steels are potential materials for fuel pin cladding in Sodium Fast Reactor (SFR) and their optimisation is essential for future industrial applications. In this paper, a feasibility study concerning ...

Edp Sciences S A2016

Creep and stress relaxation of a FeMnSi-based shape memory alloy at low temperatures

Cyril Cayron, Christian Leinenbach

The creep and stress relaxation behavior of a Fe-17Mn-5Si-10Cr-4Ni-1(V,C) (wt%) shape memory alloy at low homologous temperatures (-45 degrees C < T < 50 degrees C) was systematically studied in stress and strain controlled tensile tests. At constant stres ...

Elsevier2016

Embrittlement induced by the synergistic effects of radiation damage and helium in structural steels

Kun Wang

Ferritic/martensitic steels are candidate materials for fusion reactor structural components, liquid metal containers of spallation neutron sources, and accelerator driven systems, with good radiation resistance and thermo-mechanical properties. However, e ...

EPFL2015

Correlation between ferrite grain size, microstructure and tensile properties of 0.17wt% carbon steel with traces of microalloying elements

Shankha Nag

Five different grain sizes are produced in 0.17 wt% carbon steel using varying rates of cooling from austenitization temperatures. Controlled furnace cooling from 1100 °C and 950 °C produces coarse ferrite grains of 40 µm and 32 µm diameter, respectively, ...

Elsevier2014

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.