Effect of thermomechanical processes on Σ3 grain boundary distribution in a nickel base superalloy
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Polycrystalline materials with crystallite diameters below hundred nanometer exhibit extraordinary strength which goes along with a decrease in ductility. In order to tailor tough materials, which combine strength and ductility, the underlying deformation ...
Metal matrix composites (MMCs) comprising nano/microcrystalline matrices and reinforcements exhibit impressive mechanical behaviors derived by exploiting the size effects due to development of geometrically necessary dislocations. In such nanostructured MM ...
Microstructures, and especially grain boundary populations, are characterized in a γ/γ′ nickel-base superalloy submitted to various thermomechanical treatments involving hot deformation and subsequent supersolvus annealing. The resulting microstructures co ...
Mechanical loss measurements were performed at high temperature in fine-grained ceramics, such as zirconia and alumina. At high temperature, the mechanical loss increases exponentially with temperature, which accounts for material creep. The results are an ...
We investigate processing-microstructure relationships in the production of Al2O3 particle reinforced copper composites by solidification processing. We show that during production of the composites by gas-pressure infiltration of packed Al2O3 particle pre ...
Grain boundary engineering (GBE) aims at optimizing the properties of face centred cubic materials with low stacking fault energy by creating a high content of special twin boundaries. Quantifying twinning and its parameters, such as the twin related domai ...
Transparent polycrystalline alumina (PCA) is a promising replacement for sapphire. Its optical properties however are highly dependent on the grain size and residual porosity which need to be controlled for real inline transmittances (RIT), that are high e ...
Microstructural control is a key aspect in producing ceramics with tailored properties and is often achieved by using dopants in a rather empirical fashion. Atomic scale simulations could provide much needed insight but the long-standing challenge of linki ...
Reliable operation in harsh environments such as high temperatures, high pressures, aggressive media and space, poses special requirements for sensors and packages, which usually cannot be met using polymer-based technologies. Ceramic technologies, especia ...
Copper and copper alloys typically experience a sharp loss in ductility at intermediate temperature, induced by grain boundary damage and fracture processes. The susceptibility of the material to intermediate temperature embrittlement is, as a result, stro ...
