Importance of the α → β transformation in the variant selection mechanisms of thermomechanically processed titanium alloys
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Heavily deformed 18-carat yellow gold samples show a recrystallization peak at 700 K during the first heating. The mechanical loss spectrum of polycrystals shows a relaxation peak at about 780 K, which is absent in single crystals made from the same alloy. ...
The exact mechanism of creep resistance enhancement due to yttrium (Y) doping in a-alumina is still subject to speculation, although it is known that dopants segregate strongly to grain boundaries. The current work applies atomistic simulation techniques t ...
Despite many years of intensive research there still remain many unresolved questions in powder and ceramic technology. A majority of these issues are linked to interfacial phenomena of atomic scale origin, which makes their experimental investigation very ...
Fe-18CrWTi ODS steels are developed by CEA for the SFR generation IV program. The powders of a Fe-18CrWTi alloy reinforced by Y2O3 by mechanical milling have been annealed at 850 °C, 1100 °C and 1300 °C and their microstructure has been studied by SEM and ...
An in situ annealing stage has been developed in-house and integrated in the chamber of a Scanning Electron Microscope equipped with an Electron BackScattered Diffraction system. Based on the Joule effect, this device can reach the temperature of 1200°C at ...
Since the end of the last century, Cu damascene integration scheme has been the favoured choice for advanced interconnect technologies. Indeed, due to the lowest Cu bulk resistivity and to it higher resistance to electromigration, performances enhancement ...
Sintering aids or dopants have often been used successfully to limit the grain growth of alumina during sintering. Recently codoping of alumina with transition elements has been reported to produce additional effects in comparison to single doping in enhan ...
An equilibrated polycrystalline material is considered, containing a small fraction of void space (melt or vapor), for which the crystals are above their roughening transition against this medium. The grain boundaries are approximated to have equal free en ...
A high-temperature anelastic relaxation peak in the mechanical loss spectrum of 18-carat yellow gold polycrystals is analysed and interpreted as due to grain boundary sliding accommodated predominantly by elastic deformation of the grains. The characterist ...
Pure and barium titanate (BT) powders doped with different lanthanum concentration were prepared by the polymeric precursor method (Pechini process) which was carried out as a three-stage process from organometallic complexes. Sintering of pressed powders ...
