The effect of titania precursor on the morphology of prepared TiO2/MWCNT nanocomposite materials
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Information for phase identification may be gathered in the electron transmission microscope with spatial resolution down to the nanometre scale. Energy dispersive X-ray and electron energy loss spectrometries are based on inelastic electron/sample interac ...
In this thesis, the synthesis and characterization of V2O5-nanostructures, as well as the gas sensing properties of V2O5-nanofibers and carbon nanotubes have been investigated. Various modifications of the nanowires have been successfully employed in order ...
Electron Beam Induced Deposition (EBID) allows deposition of three-dimensional micro- and nano-structures of conductive and insulating materials on a wide range of substrates. The process is based on the decomposition of molecules of a pre-selected precurs ...
We describe a novel surface micromachining process for the fabrication of ceramic-type MEMS devices, such as free-standing cantilevers, that is based on the use of high-aspect ratio micromolds of SU8 and aluminum as sacrificial layer. 250μm-high and 100-10 ...
Permeable reactive barriers employing iron as a reactive surface have received extensive attention. A remaining issue, however, relates to their longevity. As an integral part of a long-term column study conducted to examine the influence of inorganic coso ...
CuO powders with a high specific surface area are shown to be able to produce H2O2 in aqueous solution under simulated light irradiation. The highest rate of peroxide production was observed under mild experimental conditions using O2 and a large surface a ...
Femtosecond writing of refractive-index changes in sapphire is demonstrated by doping the crystal with an appropriate ion (here: Ti3+) that reduces the threshold of the process. Passive and active buried channel waveguiding is demonstrated. ...
High resolution transmission electron microscopy (HRTEM) and X-ray energy dispersive spectroscopy (EDS) were applied to study the structure of hydroxyapatite (HAP) coatings deposited by plasma spraying on different substrates (Cu, Cr, Ni, NaCl, BaF2). Coat ...
This paper presents the results of the investigation of the hydration of alkali-activated slag (AAS) by nuclear magnetic resonance spectroscopy (NMR). The cross-polarization (CP) technique was used in combination with magic-angle spinning (MAS). This resea ...
Surface nitriding of tetragonal zirconia (t-ZrO2) has been performed with the aim of combining the optical properties of zirconium nitride (ZrN) with the hardness and toughening properties of tetragonal zirconia. A high current d.c. arc plasma source has b ...
