Dynamic indentation induced damage in silicon nitride
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Tensile properties and microstructure of Danocrystalline electrodeposited Ni at temperatures between room temperature and 330° C are presented. Above 300° C low flow stress and high tensile elongation are observed along with grain growth and segreg ...
The possibility of decreasing ultimate tensile strength associated with increasing fiber/matrix interfacial sliding is investigated in ceramic-matrix composites. An axisymmetric finite-element model is used to calculate axial fiber stresses versus radial p ...
The influence of neutron irradiation on microstructural evolution and mechanical properties of mono- and polycrystalline molybdenum and its alloys has been investigated. Tensile specimens and 3 mm diameter discs of monocrystals of pure molybdenum and Mo-5% ...
Recently, high-strength zirconia-toughened alumina (ZTA) ceramic substrates have attracted interest, because they offer much improved mechanical properties over straight alumina, while maintaining advantages such as good thermal conductivity and chemical s ...
Plastic deformation under uniaxial longitudinal tension and compression is investigated for pure aluminum reinforced with a high volume fraction of parallel alumina fibers. The matrix sub-structure is also examined in transmission electron microscopy. The ...
The rheological behavior of a solidifying alloy is modeled by considering the deforming material as a viscoplastic porous medium saturated with liquid. Since the solid grains in the mush do not form a fully cohesive skeleton, an internal variable that repr ...
The microstructure of commercially available nanocrystalline (nc) electroplated Ni foils is studied by means of Xray diffraction and transmission electron microscopy. It is shown that the microstructure is inhomogeneous and batch-dependent. Tensile propert ...
The conceptual and computational issues regarding the development of models to predict microstructure/ mechanical-property relationships in advanced ceramics are discussed. Advanced ceramics provide a particular challenge because their higher toughness or ...
The tensile strength of ceramic and metal matrix composites is subject to an important role of the fiber/matrix interface. The mechanical properties of this interface dictate the stress concentration that develops in fibers that surround a failed fiber. An ...
Force and pressure sensors based on the piezoresistive properties of thickfilm resistors are widely used due to their reliability, simplicity and lowcost. Recently, the introduction of low-temperature co-fired ceramic(LTCC) substrates has allowed further i ...