Irradiation creep and microstructural changes in an advanced ODS ferritic steel during helium implantation under stress
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The importance of Fibre Reinforced Polymers (FRPs) as a material used for civil engineering purposes has grown in the last decade. Especially the introduction of pultrusion at an industrial level as a way to produce big batches of FRP made it possible to o ...
The present paper addresses the correlation between mechanical damage and the change in electrical resistance of CFRP under tensile loading. A linear relation between the strain and the electrical resistance of single carbon fibers was obtained experimenta ...
The translational dynamics of CF3 in liquid helium have been investigated by photodissociating CF3I dissolved in helium droplets consisting of several thousands of atoms. The velocity distribution of CF3 fragments that have escaped from the droplets has be ...
Reduced activation martensitic steel specimens were irradiated by dual-beam from 0.1 to 50 dpa at 250 and 300 degreesC with 10 He appm/dpa. The in-situ microstructure observation shows that the bubbles were present after 1.7 dpa for 250 degreesC irradiatio ...
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
We report on solar-blind metal-semiconductor-metal (MSM) detectors fabricated on stacks of (AI,Ga)N layers with different Al mole fraction. These structures were grown by molecular beam epitaxy on sapphire substrates to allow backside illumination and a lo ...
One of the key problems in dental biomechanics is the prediction of tooth mobility under functional loads. Understanding tooth displacement due to load is becoming more important as new solutions in dental restorations, prosthodontics and orthodontic treat ...
In the frame of the European Fusion Technology Programme, the Forschungszentrum Karlsruhe and the CRPP Villigen are developing a 60 kA current lead for the ITER Toroidal Field Coils using High Temperature Superconductors. In part 2 of the task, two 10 kA H ...
Recently at JET a pure helium campaign has been performed. The exploration of the density limit in L-mode limiter as well as L-mode and H-mode diverted plasmas was one of the main objectives. In L-mode plasmas the density can be increased until the total r ...
An assessment of the true stress-true strain relationship has been done by means of tensile and small ball punch tests on austenitic and tempered martensitic steel at room temperature. A finite element model was developed and validated to calculate the for ...
