Converse mode piezoelectric coefficient for lead zirconate titanate thin film with interdigitated electrode
Related publications (32)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This work reports on the design and fabrication of fundamental shear horizontal (SH0) mode acoustic resonators based on a suspended lithium niobate (LNO) film at 1.04 GHz. Due to the large e16 piezoelectric coefficient of YX36 degrees.-cut LNO, fabricated ...
Thermoelectric conversion remains an active research field in light of its potential to enhance energy efficiency by waste heat recovery in a noise and wear-free manner.Nanostructuring is responsible for most of the recently reported improvements of the fi ...
The interface tailoring is crucial for the efficiency and stability of Perovskite Solar Cells (PSCs). The reported interface engineering primarily focuses on the energy level turning and trap state passivation to improve the photovoltaic performance of PSC ...
A robust capacitive multisensory readout system is presented in this article. The system consists of a few thousand lossy capacitive-based sensors that can be modeled as a parallel connection of sensor capacitor and undesirable leakage resistance. The real ...
Semiconductor materials have given rise to today's digital technology and consumer electronics. Widespread adoption is closely linked to the ability to process and integrate them in devices at scale. Where flexibility and large surfaces are required, such ...
Thanks to the continuous improvement of crystalline silicon (c-Si) solar cells, largely dominating the market, photovoltaic electricity is nowadays the cheapest source of energy on the market. Yet, solar energy is far from being completely harvested, as t ...
To advance the field of piezoelectrics, it is desirable to find materials that combine high piezoelectricity with high elasticity. Applications such as self-sensors, stretchable electronics, soft robots, and energy harvesting would benefit tremendously. Ho ...
This thesis reports on the study and use of low temperature processes for the deposition of indium gallium nitride (InGaN) thin films in order to alleviate some of the present drawbacks of its monolitic deposition on silicon for photovoltaic applications. ...
Ferroelectricity has made a huge impact on science and technology since Joseph Valasek (then a Ph.D. student at the University of Minnesota) discovered it in 1920, a little longer than 100 years ago. Whereas Dr. Valasek's original research was motivated by ...
In this work, the emergence of polarization and electro-mechanical coupling in Pb(Mg1/3Nb2/3)O3 and Pb(Mg1/3Nb2/3)O3 â PbTiO3 was investigated by means of thermally stimulated current, and nonlinear dielectric and electro-mechanical measurements. The pre ...