Polymer-based cantilevers with integrated electrodes
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Spark-assisted chemical engraving (SACE) is a flexible, simple and inexpensive method for machining electrically non-conductive materials. SACE is particularly interesting because of the high drilling speed that can be achieved compared to other micromachi ...
Modern communication devices demand challenging specifications in terms of miniaturization, performance, power consumption and cost. Every new generation of radio frequency integrated circuits (RF-ICs) offer better functionality at reduced size, power cons ...
Scanning probe microscopy has become, nowadays, a branch of microscopy widely used to image surfaces of different specimens. Among the various applications, the magnetic imaging is one of the most exciting scanning probe microscopy techniques. It allows th ...
We have developed a hybrid scanning probe microscopy sensor consisting of a SU-8 body and full platinum cantilever and tip. The fabrication process is based on surface-micromachining of a silicon wafer, where oxidation sharpened moulds define the tip shape ...
We have designed and fabricated a low-range (ca. 100 mN) thick-film piezoresistive force sensor with a cantilever beam fabricated in LTCC (Low Temperature Co-fired Ceramic). The beam was soldered onto a standard thick-film 25.4 x 12.7 mm signal conditionin ...
The mid-infrared range is of interest in spectroscopic applications, due to the large number of organic compounds that exhibit characteristic absorption bands in this spectral region. Semiconductor technology, however, has been developed mainly for the nea ...
We report on the fabrication of atomic force microscopy (AFM) probes using a novel technology that performs every machining step by means of one single deep reactive ion etching (DRIE) equipment. Specific etching conditions are optimized in order to define ...
We report the fabrication of solenoidal microcoils with hollow core embedded within two 100 µm thick borosilicate glass wafers. The main process steps are the reactive ion etching of borosilicate glass, anodic wafer bonding, copper metal organic chemical v ...
During this project, ultrasensitive cantilevers designed for nuclear magnetic resonance applications were fabricated and characterised. The cantilevers are 500, 340 or 200 μm long, 10 or 20 μm wide and 500 or 340 nm thick and integrate a thin film of cobal ...
We report on the fabrication of atomic force microscopy (AFM) probes using a novel technology that performs every machining step by means of one single deep reactive ion etching (DRIE) equipment. Specific etching conditions are optimized in order to define ...
