Effect of Heat Current on Magnetization Dynamics in Magnetic Insulators and Nanostructures

The term "spin caloritronics" defines a novel branch of spintronics that focuses on the interplay between electron spins with heat currents. In the frame of this research area, this thesis is aimed at investigating the effect of a heat current on magnetization dynamics in two different typologies of systems and materials: magnetic insulators and metallic nanostructures. In the first case we conduct studies on yttrium iron garnet (YIG) samples subjected to a temperature gradient. The irreversible thermodynamics of a continuous medium with magnetic dipoles predicts that a thermal gradient across a YIG slab, in the presence of magnetization waves, produces a magnetic field that is the magnetic analog of the well known Seebeck effect. This thermally induced field can influence the time evolution of the magnetization, in such a way that it is possible to modulate the relaxation of the precession when applying a heat current. We found evidence for such a magnetic Seebeck effect (MSE) by conducting transmission measurements in a thin slab of YIG subjected to an in-plane temperature gradient. We showed how the MSE can modulate the magnetic damping depending on the direction of the propagating magnetostatic modes with respect to the orientation of the temperature gradient. In the second part of the thesis we focus our investigation on metallic nanostructures subjected to a heat current. In a metal, the three-current model (current of entropy, of spin up and spin down electrons) predicts that a heat current induces a spin current which will then influence the magnetization dynamics like a charge-driven spin current would. Hence, we explore what has been called Thermal Spin Torque in electrodeposited Co / Cu / Co asymmetric spin valves placed in the middle of copper nanowires. These samples are fabricated by conventional electrodeposition technique in porous polycarbonate membranes using an original method that allows high frequency electrical measurements. We used a modulated laser to investigate the effect of a temperature gradient. We observed a heat-driven spin torque by measuring electrically the quasi-static magnetic response of a spin valve when subjected to the heat current, generated by two laser diodes heating the electrical contact at one end or the other of the nanowire. Analysing the variation in the resistance induced by a heat-driven spin torque, represented by peaks occurring in correspondence with the GMR transition, we found that a temperature difference of the order of 5 K is sufficient to produce sizeable torque in spin valves.

Magnetic states and spin-wave modes in single ferromagnetic nanotubes

Daniel Rüffer

In this thesis the electrical properties, magnetic states and spin wave resonances of individual magnetically hollow ferromagnetic nanotubes have been studied. They were prepared from the different materials Nickel (Ni), Permalloy (Py) and Cobalt-Iron-Boron (CoFeB), deposited as shells onto non-magnetic Gallium-Arsenide (GaAs) semiconductor nanowires via Atomic Layer Deposition (ALD), thermal evaporation and magnetron sputtering, respectively. The resulting nanotubes had lengths between 10 to 20 μm, diameters of 150 to 400 nm and tube walls (shells) which were 20 to 40nm thick. Structural analysis of the tubes by Transmission Electron Microscopy revealed a poly(nano)crystalline (Ni, Py) and amorphous (CoFeB) structure. Electrical transport experiments as a function of temperature revealed different transport mechanisms for each of the materials. Electron-phonon scattering dominated the temperature dependence of the resistivity in Ni, while a clear evidence for electron magnon scattering was observed in Py. Electron-electron interaction in granular and amorphous media was identified as the major contribution to the temperature dependence in CoFeB. The Anisotropic Magnetoresistance (AMR) ratios have been determined for all tubes and different temperatures. Ni nanotubes exhibited a large relative AMR effect of 1.4% at room temperature. The AMR measurements provided information about the magnetic configurations as well as the magnetization reversal mechanism. Indications for the formation of vortex segments in Ni tubes were found for the magnetization reversal when the magnetic field was perpendicular to the nanotube axis. In cooperation with the Poggio group in Basel, cantilever magnetometry has been used for the further characterization of the nanotube magnetization. The magnetization curves were compared to the AMR measurements and finite element method (FEM) micromagnetic simulations. The comparison between the experimental results and the simulations suggested that the roughness of Ni tubes gave rise to segmented magnetic switching. An almost perfect axial alignment of the remanent magnetization has been observed in Py and CoFeB nanotubes. The influence of the inhomogeneous internal field in transverse magnetic fields was investigated by simulation. The segment-wise alignment of spins with the field direction is argued to provoke characteristic kinks in the hysteresis curve and measured AMR effect. Magnetothermal spatial mapping experiments using the anomalous Nernst effect (ANE) complemented the magnetotransport experiments in cooperation with the group of Prof. Grundler in Munich. Here, first evidence of end-vortices entering the nanotube before reversal could be found. Electrically detected spin wave resonance experiments have been performed in cooperation with the group of Prof. Grundler on individual nanotubes. The detected voltage, generated by the spin rectification effect, revealed multiple resonances in the GHz frequency. The experimentally observed resonances were compared to calculated ones extracted from dynamic simulations. With this comparison, the signatures could be attributed to azimuthally confined spin-wave modes. The deduced dispersion relation suggested the quantization of exchange dominated spin waves in that resonance frequencies follow roughly a quadratic dependence on the wave vector.

EPFL2014

Spin dependent thermoelectric effects in magnetic nanostructures

Santiago Serrano Guisan

The aim of this thesis work was to obtain a deeper understanding of spin-dependent transport by the study of mixed effects of heat and charge currents in magnetic nanostructures. Indeed, even thermodynamics establish a relationship between both currents, no previous works were performed in this sense up to now. In order to do this, an original experimental setup was developed which allows to carry out a novel transport measurement called the thermogalvanic voltage (TGV). It measures the AC voltage response of the sample driven by an oscillatory variation of the temperature induced by a chopped laser beam focused on the nanostructure under a direct current flow. The main advantage of this new experimental setup is that it can be used to perform three different transport measurements: resistance, thermoelectrical power and TGV measurements. Furthermore, the well-defined junctions of our magnetic nanowires, in addition to the lock-in detection of signals, allows to obtain a better quality of thermoelectrical measurements than those observed by other groups. Different kind of magnetic nanowires like ferromagnetic/non-magnetic multilayers and ferromagnetic homogeneous nanowires were studied by these three different transport measurements. All these nanowires were 6μm in length and 50nm in diameter. All TGV measurements reveal a linear dependence with currents. This behaviour can be interpreted in terms of adiabatic conductivity for homogeneous nanowires and in terms of Peltier effect for multilayer nanowires produced in ferromagnetic/non-magnetic interfaces. Furthermore, the magnetic field dependence of TGV (MTGV) cannot be accounted for by GMR and MTEP effects. Therefore, a novel spin-dependent mechanism is invoked in such measurements. A simple phenomenological model, ascribed in the framework of thermodynamics of irreversible processes, was developed to explain this effect. It allows to identify this phenomena to a novel spin-dependent variable: The asymmetry of spin-mixing mechanisms (ΔL). This variable will be related to the difference of transition rates between both spin channels (τ-1+- and τ-1-+) developed in ferromagnetic material due to electron-magnon interactions. A large magnetic field dependence of TGV signals were observed in magnetic granular systems. Moreover, MTGV shows a different dependence from GMR on magnetic field, grain size and temperature. This effect is identified as a spin-mixing mechanism produced by the electron spin precession about the magnetic grain moments.

EPFL2006

Current Induced Magnetization Dynamics in Electrodeposited Nanostructures

Elena Murè

In this thesis we make use of the Spin Transfer Torque effect from a continuous microwave current to induce and study the spin dynamics of an individual sub-100 nm nanostructure. The idea that an electrical current can carry a spin angular momentum was introduced in the 1980 with the advent of Spintronics. In 1996, Slonczewski and Berger predicted that, when flowing through a metal ferromagnet, such a spin polarized current can exert a torque on the magnetization. This effect is known as Spin transfer Torque (STT) and implies the possibility to manipulate the magnetization by means of an electrical current. One of the characteristics of the STT effect is that it allows for the magnetization dynamics to be excited and detected electrically. This makes the STT a perfect tool for the investigation of spin dynamics at the nano-scale. Indeed, the intrinsic local character of transport measurements permits a single nanostructure to be addressed and studied. This thesis is devoted to the study of the STT effect induced by a microwave current (AC STT). Our experiment focuses on two main aspects: the intrinsic dynamics of the magnetization and the role of a microwave current in assisting the magnetization reversal. We perform our measurements on Co/Cu nanowires electrodeposited in nanoporous polycarbonate templates. The electrical contact to a nanostructure is realized thanks to a home-made sample-holder, without the use of any lithographic technique. In the first part of the thesis a continuous microwave current is used to both drive and probe the magnetization dynamics of a pseudo spin valve nanostructure. Our measurements show that the magnetization dynamics in such a structure is extremely complex and arises from the excitation of both magnetic layers in the pseudo spin valve. In the dynamical spectrum we identify the fundamental modes of both magnetic layers, as confirmed by macrospin simulations. Higher frequency modes are attributed to spatially non-uniform spin wave excitations, in agreement with that observed by others in arrays of nanoelements. These results validate our technique for making samples and contacting them for AC STT-induced dynamical studies. The second part of this work is aimed at testing the effect of AC STT on the static switching field of magnetic nanoelements. The magnetoresistive curve of a pseudo spin valve structure is recorded with and without an additional microwave current. Our results prove the effectiveness of AC STT in assisting the magnetization reversal. We measured a reduction of the switching field up to 80 mT by injecting a microwave current of about 100 µA. This experiment suggests that the range of sensitivity of magnetoresistive devices could be tuned by simply injecting a continuous microwave current. This point is particularly interesting for the prospect of technological applications such as magnetic sensors.

EPFL2010