Micromirrors for integrated tunable mid-infrared detectors and emitters
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
We review recent results on wafer fused long wavelength VCSELs emitting in the 1310 - 2000 nm range. This technology allows reaching fundamental mode output in excess of 4.5 mW at room temperature and close to 3 mW at 70 degrees C for both the 1310 nm and ...
Ieee Service Center, 445 Hoes Lane, Po Box 1331, Piscataway, Nj 08855-1331 Usa2009
The realization of a vertically moving micromirror using electrostatic actuation in a comb drive configuration is presented. The micromirror is designed for the use in tunable mid-infrared Resonant Cavity Enhanced Detectors (RCEDs). It can be displaced mor ...
We present our optical investigations on the frustrated spin cluster compound FeTe2O5Cl, which develops a long-range antiferromagnetic order below 10 K. We measure the optical reflectivity from the far-infrared to the ultraviolet with polarized light. We f ...
Although invented for precision measurements of single atomic transitions, frequency combs have also become a versatile tool for broadband spectroscopy in recent years. Here, we present a novel and simple approach for broadband spectroscopy, combining the ...
This paper presents continuative results on the design, fabrication and measurements of a vertically moving, electrostatically actuated micromirror, first shown at the IEEE MEMS 2007 [N. Quack, I. Züst, S. Blunier, J. Dual, M. Arnold, F. Felder, M. Rahim, ...
This is the first part of the two articles reporting investigation of a thermal detector-type far-infrared sensor operating in the 8–14µm wavelength, using Low-Pressure-Chemical-Vapor-Deposition (LPCVD)- deposited low-stress Si-rich nitride (SiN)membrane a ...
A PDMS based tuneable microoptical system fabricated merging deep reactive ion etching, SU-8 and soft lithography, with a low-cost (mass-production), simple and highly repetitive technology, is presented. This system consists on a structure of two microlen ...
Tunable resonant cavity enhanced detectors (RCED) have been realised for the mid-infrared (IR). The bottom mirror as well as the photodiode inside the cavity are based on narrow gap IV-VI materials and grown by molecular beam epitaxy (MBE) on Silicon subst ...
Highly sensitive photodetectors for the mid-infrared have recently been obtained by placing a photodiode inside a Fabry-Pérot cavity (Arnold et al 2005 Appl. Phys. Lett. 87 141103). These resonant cavity enhanced detectors (RCED) are sensitive at the res ...
Gold crescent-shaped nanoparticles, exhibiting multiple resonances in the visible and near-infrared spectral region, were characterized in terms of their optical response to thin dielectric coatings. A strong red shift of the resonances is observed upon th ...
