Gas Preconcentrator Made by Rolling up a Printed Hotplate on Foil
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Master sintering curve (MSC) was used as a practical approach to analyse the sintering behavior of an ultrafine alumina powder. Non-isothermal sintering was carried out at three heating rates. The concept of the MSC has been used to investigate the effect ...
Extending the idea of exergy to practitioners and policy makers is still a major challenge. Recently the "Canton of Geneva" in Switzerland introduced a new law governing the procedures of attribution of building permits for new or retrofitted city areas. A ...
Fabrication of sensors and micro-fluidic structures from low temperature co- fired ceramic (LTCC) sheets is a growing interest in the micro-packaging community. Such devices usually have inner cavities, whose production is quite complicated. The most elega ...
A decomposition model for resin in glass fiber-reinforced polymer composites (GFRP) under elevated and high temperature was derived from chemical kinetics. Kinetic parameters were determined by four different methods using thermal gravimetric data at diffe ...
The properties of Pb1-xCaxTiO3 (x=0-30) thin films for applications in point-detectors and arrays can be further improved ii porous, low-dielectric constant layers are being Used. Both 2-methoxyethanol and 1,3-propanediol based solution precursors were use ...
Tunnelling experiments have played an essential role in the development and verification of theories for superconductivity. They are usually interpreted within the so-called semiconductor model, in which the tunnelling current is given by the convolution o ...
A complex heating and cogeneration plant including two 3.9 MWth ammonia heat pumps and two 3 MWel gas turbines with heat recovery boilers and three storage tanks of 66 GJ has been in operation since 1986. The heating surface is actually about 280’000 m2 an ...
Dynamic Mechanical Analysis was conducted on a polyurethane adhesive at different constant heating rates up to 100°C, covering the glass transition range. Different storage modulus degradation curves were obtained from different heating rates. The differen ...
This thesis presents the fabrication and characterization of organic thin film transistors (TFTs) on flexible polymer substrates and the development of compliant stencil lithography to significantly improve the patterning resolution on full-wafer scale. Po ...
