Scanning tunneling microscopy of the charge density wave in 1T-TiSe2 in the presence of single atom defects

We present a detailed low-temperature scanning tunneling microscopy (STM) study of the commensurate charge density wave (CDW) in 1T-TiSe2 in the presence of single atom defects. We find no significant modification of the CDW lattice in single crystals with native defect concentrations where some bulk probes already measure substantial reductions in the CDW phase transition signature. A systematic analysis of STM micrographs combined with density functional theory modeling of atomic defect patterns indicate that the observed CDW modulation lies in the Se surface layer. The defect patterns clearly show there are no 2H-polytype inclusions in the CDW phase, as previously found at room temperature [A. N. Titov et al., Phys. Solid State 53, 1073 (2011)]. They further provide an alternative explanation for the chiral Friedel oscillations recently reported in this compound [J. Ishioka et al., Phys. Rev. B 84, 245125 (2011)].

Submonolayer growth of cobalt on metallic and insulating surfaces studied by scanning tunneling microscopy and kinetic Monte-Carlo simulations

Philipp Buluschek

Submonolayer epitaxial growth is obtained by the deposition of less than a complete layer of atoms on a single crystal surface. It is of fundamental interest for industrial applications (e.g. in the semiconductor industry) as well as from the point of view of basic research. For example, it is known that nanometer-sized atomic structures (nanostructures) exhibit remarkable physical and chemical properties which can differ greatly from those of bulk matter. In order to investigate these properties, it is often necessary to create large quantities of well defined and possibly spatially ordered nanostructures. One way to achieve this result is self-organized growth where one deposits atoms on a clean crystalline surface and lets the growth process evolve freely. Here, nanostructures result from the atomic diffusion and aggregation processes taking place at the surface. Understanding the exact nature of these processes is of ongoing interest in the field of nanostructure growth. In this thesis we report about submonolayer growth experiments of the ferromagnetic transition metal cobalt. Cobalt was chosen because it exhibits remarkable magnetic properties. These experiments were performed in an ultra-high vacuum chamber and molecular beam epitaxy was used to grow the nanostructures. Observations of the surface were made using a variable-temperature scanning tunneling microscope (STM). In order to get a better understanding of the atomic processes happening at the surface, we developed two adapted computational simulation methods. Kinetic Monte-Carlo (KMC) simulations were used to get an atomistic picture of the surface while mean field rate equations were integrated numerically to yield cluster densities. We study the growth of cobalt on three different surfaces. By depositing Co on a clean Pt(111) crystal surface, we observe that the platinum surface reconstructs by forming star-shaped partial dislocations for sample temperatures above 180 K (-93°C). We also observe that island densities deviate from predictions of all known models towards higher values for these same temperatures. By simulation we are able to show that insertion of Co into the topmost platinum layer creates a repulsive network of dislocations. We show that these dislocations act as diffusion inhibiting barriers and thus influence the island density by constraining the free movement of atoms at the surface. We also show that the Co dimer and trimer diffuse on Pt(111) before dissociating and are able to extract corresponding activation barriers. We also study the deposition of Co on a Ru(0001) surface which shows a more conventional temperature dependence. By comparing simulation and experiment we extract all relevant diffusion activation barriers and show that at high temperatures the Co dimer and trimer dissociate. Finally, we investigate the growth of Co on the hexagonal boron nitride superlattice which forms on a Rh(111) surface. On this surface Co clusters form three-dimensional hemispherical dots. We show how the substrate corrugation influences diffusion of Co atoms and that clusters up to the size of the pentamer can diffuse. By simulation, we also extract the relevant migrations and desorption barriers.

EPFL2008

Growth and characterization of specific self-assembled supramolecular architectures at crystal surfaces

Marta Canas Ventura

In the framework of this thesis self-assembled supramolecular architectures of several molecular species on crystal metal surfaces are characterized. These investigations combine results obtained by means of scanning tunneling microscopy (STM), scanning tunneling spectroscopy (STS), X-Ray Photoelectron Spectroscopy (XPS), and Near-Edge X-Ray Absorption Fine Structure Spectroscopy (NEXAFS). The interest in controlling the formation of specific arrangements of supramolecular ensembles at surfaces is motivated to a great extent by the prospect to design molecular devices and nanomaterials with customized properties. The goal is a "spontaneous" creation of targeted, well-ordered molecular architectures, which shall be achieved by taking advantage of the molecule's propensity to self-assemble. Control means, in this context, predictability. This term address the accuracy of the prediction of the structures resulting from molecular self-assembly for systems exhibiting different characteristics. Here, system stands for a particular combination of a single-crystal surface and adsorbed molecular species. In a first part, the focus is given to the impact of a Pd(111) surface exhibiting high chemical activity. Due to surface induced deprotonation two resulting chemical states are found for the adsorbed terephthalic acid species. Deprotonation of the carboxyl moieties is observed to affect the topology of the molecular assemblies even though hydrogen bonds (H-bonds) are responsible for the stabilization of assemblies of both, intact and deprotonated molecular species. Therefore, the selective fabrication of a single specific molecular structure becomes a challenge when the surface is prone to induce chemical reactions. Secondly, a molecular species exhibiting conformational flexibility is studied on a largely inert Au(111) surface. It is observed that the characteristic conformational flexibility is also active on the surface, and the molecule is found to adopt different conformations depending on the locally most favorable bonding motif. In particular, phenyl groups may undergo a rotation such that one-dimensional chains can be stabilized by means of intermolecular H-bonds. This phenomenon is very interesting from an adsorbate-substrate interaction point of view, but it limits the predictability of supramolecular structures formed upon self-assembly. In a third step, a comparative study of the self-assembly of three closely related molecular species highlights the impact of concurrent competing intermolecular interactions. Molecules exhibiting an increasing number of possible interaction channels are found to assemble into an increasing number of distinct supramolecular architectures. The most flexible molecular species allowing for different hydrogen-bonding patterns as well as dipolar coupling self-assembles into various structurally complex architectures. Structural predictability, however, is low since the formation of one or the other assembly appears to depend on small variations in sample preparation conditions and on poorly controllable local surface properties. Finally, a system where the resulting structures fully agree with predictions evidences the possibility to control the formation of targeted specific supramolecular architectures. The formation of well ordered bimolecular ribbons and wires over extended length scales is accomplished by the rational choice of both, complementary building blocks for the selective formation of three-fold H-bonds and a nanostructured surface to guide the molecular self-assembly. Furthermore, the impact of H-bond formation on the electronic structure of self-assembled molecular building blocks is probed by STS measurements. The experimental data reveal shifts in the electronic levels depending on the H-bond configuration and on the local characteristics of the underlying surface. In order to improve the precision of such a study, single molecules, homo- and heteromolecular dimers as well as trimers are successfully isolated and assembled by molecular manipulation with the STM tip. Further STS studies on such artificially assembled structures are suggested.

EPFL2008

Magnetism and Atomic Scale Structure of Bimetallic Nanostructures at Surfaces

Sergio Vlaic

his thesis reports on the magnetic properties of bi- and tri-metallic nanostructures at surfaces. The main goal is to build the smallest nanostructure ferromagnetic at room temperature and the assembly of those structures in high density arrays. To this purpose we have developed an approach consisting in a fine engineering of the nanostructure chemical structure at the atomic level. We grow core-shell nanostructures with atomically sharp interfaces between the different constituents and we investigate the effects produced by these interfaces as a function of their chemistry and structure. This approach is then used to grow organized arrays of bimetallic nanostructures that represent model systems for next generation high density magnetic storage media. The magnetic properties of the different experimental systems were investigated by magneto-optical Kerr effect (MOKE) and they were correlated to the morphology obtained by scanning tunneling microscopy (STM). The first part focuses on the understanding of the effects of atomically sharp interfaces among several elements. Two dimensional cobalt nanostructures have been grown on Pt(111) single crystal surface and subsequently their edges have been decorated by Fe, Pt or Pd. This one-dimensional decoration produces element dependent variations of the magnetic anisotropy energy with strong enhancement for Fe decoration and reduction for Pt and Pd. Furthermore we observe a crystallographic direction dependence on the effect of Pt and Pd decoration since Co/Pt or Co/Pd staking with {111}-orientation strongly enhances the magnetic hardness of the nanostructures. The effect of atomically sharp Co/Fe one-dimensional interface has been compared with direct alloying of the two elements finding the first one to give the highest effect for shell thicknesses smaller than 5 atoms. With the help of fully relativistic ab-initio we were able to reproduce the experimental results and unravel their pure electronic origin. The electronic hybridizations at the interface between the elements gives rise to "hot spots" in the electronic band structure responsible of a strong variation of the magnetocrystalline anisotropy resulting in the enhanced magnetic hardness. By growing Co-core Fe-shell Pd-capped nanostructures we were able to enhance the magnetization thermal stability of nanostructures by almost a factor of 3 with respect single-metal nanostructures of the same size. In the second part of this thesis, the first attempt of growing organized array of bimetallic nanostructures is presented. Taking advantage of the well-known self organized growth of Co nanodots on Au(111)-vicinal surfaces, we were able to grow Co-core Fe-shell nanodots on Au(11,12,12) single crystal. The thermal stability enhancement produced by the atomically sharp Co/Fe interface is higher than the direct alloying of the two elements as in the previous case. We argue that with this method, combined with three-dimensional growth of nanostructures arrays, it will be possible to produce multimetallic nanodots composed by ≈ 3000 atoms with magnetization thermal stability suitable for magnetic storage media. In the last part another model system for magnetic nanostructure superlattices is presented. Fe nanostructures have been grown on the Pd-seeded and unseeded alumina thin film formed by oxidation of a Ni3Al(111) single crystal surface at high temperature. We found that the sample stoichiometry near the surface evolves with the preparation cycles. This leads to the formation of a Ni-rich region, close to the alumina surface, ferromagnetic up to 250 K. By means of X-ray magnetic circular dichroism measurements we were able to estimate the amount of Ni in excess. Fe clusters deposited on the alumina surface are magnetically coupled to the Ni-rich region independently on the presence of Pd. Nevertheless, the system behavior cannot be explained by a simple ferromagnetic or antiferromagnetic coupling. We argue that the Fe nanostructures are coupled to the substrate by an interlayer exchange coupling across the alumina thin film. The coupling constant is expected to change sign depending on the distance between the Fe clusters and the Ni-rich region resulting in a peculiar magnetic behavior of the system.

EPFL2013

Submonolayer growth of cobalt on metallic and insulating surfaces studied by scanning tunneling microscopy and kinetic Monte-Carlo simulations

Philipp Buluschek

EPFL2008

Growth and characterization of specific self-assembled supramolecular architectures at crystal surfaces

Marta Canas Ventura

EPFL2008

Magnetism and Atomic Scale Structure of Bimetallic Nanostructures at Surfaces

Sergio Vlaic

EPFL2013