The effect of heating rate on the softening behaviour of a deformed Al–Mn alloy with strong and weak concurrent precipitation
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Extending the idea of exergy to practitioners and policy makers is still a major challenge. Recently the "Canton of Geneva" in Switzerland introduced a new law governing the procedures of attribution of building permits for new or retrofitted city areas. A ...
Dislocation dynamics in a Ni-3(Al, Ta) single-crystal alloy have been studied by means of mechanical spectroscopy at intermediate temperatures, that is in the temperature range of the flow stress anomaly. The mechanical loss of specimens predeformed at 300 ...
Copper and copper alloys typically experience a sharp loss in ductility at intermediate temperature, induced by grain boundary damage and fracture processes. The susceptibility of the material to intermediate temperature embrittlement is, as a result, stro ...
A decomposition model for resin in glass fiber-reinforced polymer composites (GFRP) under elevated and high temperature was derived from chemical kinetics. Kinetic parameters were determined by four different methods using thermal gravimetric data at diffe ...
Fabrication of sensors and micro-fluidic structures from low temperature co- fired ceramic (LTCC) sheets is a growing interest in the micro-packaging community. Such devices usually have inner cavities, whose production is quite complicated. The most elega ...
Dynamic Mechanical Analysis was conducted on a polyurethane adhesive at different constant heating rates up to 100°C, covering the glass transition range. Different storage modulus degradation curves were obtained from different heating rates. The differen ...
Temperature dependence of physical and mechanical properties is considered in most thermal and mechanical response models for composite materials. Based on thermogravimetry analysis, differential scanning calorimetry, and dynamic mechanical analysis conduc ...
A new type of air-water heat pump has been developed with the aim to cover an extended application range in high temperature residential heating (for retrofitting existing oil or gas boilers in hydronic heating systems). The base heat output is about 10 kW ...
Master sintering curve (MSC) was used as a practical approach to analyse the sintering behavior of an ultrafine alumina powder. Non-isothermal sintering was carried out at three heating rates. The concept of the MSC has been used to investigate the effect ...
Surface vanadia species formed on vanadia/titania catalysts consisting of 0.2-2.6 monolayers (ML) of VOx have been characterized by FT-Raman spectroscopy under controlled atm., temp.-programmed redn. in hydrogen (TPR), and soly. in dild. HNO3. Three types ...
