Advances in understanding hydration of Portland cement
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Concrete deterioration is a natural process, which has to be carefully monitored over a the service life of a structure. The Alkali-Silica Reaction (ASR) is a slow-process degradation, which devel-ops over decades and is therefore difficult to predict. Sin ...
Depending on the environmental conditions, concrete materials can come into contact with sulfate ions which are widely present in rivers, underground water, sewers, seawater and soil. Sulfates can react with the cement paste in concrete and cause damage wh ...
Calcium sulphoaluminate cements (CSA) with the main phase yeâelimite are a promising class of non-Portland cements which are gaining increasing interest from the cement industry. However, the hydration kinetics of CSA cements varies strongly, even for ce ...
Working group 2 of the RILEM TC 238-SCM undertook a comparison of laboratories and techniques for the quantification of the degree of reaction of supplementary cementitious materials in blended cements. A common set of binary pastes of Portland cement with ...
Limestone calcined clay cements (LC3) are blended cements that combine clinker, limestone, calcined clay and gypsum. The availability of the materials required to produce LC3 and the good performance that it achieves, makes LC3 suitable as a sustainable re ...
By replacing part of Portland cement with so-called supplementary cementitious materials (SCMs) it is possible to reduce the CO2 footprint of the cement industry. These SCMs are commonly limestone, calcined clay, slag and fly ash. While doing so the early ...
The aim of this thesis is to understand the mechanisms underlying the main hydration peak and later ages of alite hydration; it proposes new mechanistic models for these two stages.Alite is the main constituent of Portland Cement (PC), and is responsible ...
The combination of calcined kaolinitic clays and limestone in Limestone Calcined Clay Cement (LC3) is a promising approach to reduce the cost and the CO2 emissions of cement production by reducing the clinker content of cement. This thesis investigates the ...
The effect of increasing sulfate contents on the hydration of white cement was studied with a multi-technique approach. Quantitative X-Ray Diffraction (XRD) revealed that adding more gypsum in the cement resulted in more ettringite formation. Combining iso ...
In this paper, compacts of synthetic calcium silicate hydrate (C-S-H) with 0.8-1.5 calcium-to-silicon ratio (Ca/Si) and 30-80% porosity were prepared by one-direction cold pressing. The Young's modulus and the creep of C-S-H compacts were measured by micro ...