Hydration of multi-component cements containing cement clinker, slag, calcareous fly ash and limestone
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The utilization of post-industrial waste materials is often challenging due to environmental regulations. Additionally, the scarcity of raw materials for producing cement is generating the demand for alternate sources of materials. The current study explor ...
Treatment by accelerated carbonation has been widely studied to enhance the quality of recycled concrete aggregates (RCA) and hence the performance of new concrete produced with the RCA. This is often ascribed to the densification of RCA. This study invest ...
Partial replacement of clinker with supplementary cementitious materials (SCMs) is an effective approach to reduce CO2 emissions related to cement production. However, there is a maximum substitution level with SCMs beyond which strength decreases. The und ...
The aim of this thesis is to understand the mechanisms underlying the main hydration peak and later ages of alite hydration; it proposes new mechanistic models for these two stages.Alite is the main constituent of Portland Cement (PC), and is responsible ...
Sodium gluconate has been shown to compensate the impact of alkalis on the long term strength development of cement pastes. This work studies the impact of sodium gluconate combined with Na2SO4 on the microstructural development of white cement-slag system ...
At the turn of the 19th century, the production and use of concrete were limited by the unavailability of raw materials to produce good cement in several places. From that time onwards, the progress of chemistry and a number of empirical discoveries opened ...
Among different methods of measuring early age autogenous deformation of cementitious materials, the corrugated tube method described in the ASTMC1698-09 standard is one of the most commonly used. Despite the standardization and the common application of t ...
The phase assemblage of binary Portland cements with 45 wt% replacement by calcareous fly ash and slag has been investigated by experiment, mass balance and thermodynamic simulations. The input for these calculations was based on clinker reaction measured ...
Supplementary cementitious materials (SCMs) are currently used to replace part of the clinker to reduce the environmental impact of cement and to favor the use of local materials. Two representative SCM have been used in this work: slag and fly ash. Each o ...
This work studies the effect on Embodied Energy (EE) of concrete when Ordinary Portland Cement (OPC) is partially substituted with natural Pozzolanic Volcanic Ash (VA) at the material and the building scale. The work aims to demonstrate potential improveme ...
