Numerical analysis of fragmentation in tempered glass with parallel dynamic insertion of cohesive elements
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The constant improvement of polymer composite materials has allowed their integration in many industrial fields where their mechanical and chemical properties are apparently attractive. Mixed metal-composite insulators are now increasingly used for high vo ...
Floating production, storage and offloading systems (FPSOs) have been widely used for the development of offshore oil and gas fields because of their attractive features. They are mostly ship-shaped, either converted from existing tankers or purposely buil ...
Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...
The resistance as well as strain hardening and softening properties of UHPFRC depend on the type of matrix and mainly on the fibre dosage and final distribution and orientation in the element. The strength and deformability distribution in a thin UHPFRC pa ...
Japan Concrete Institute (JCI) Japan Society of Civil engineers (JSCE) Canadian society for Civil engineering (CSCE) ConMat'092009
In composite processing, a compressible dry fiber preform is in many cases impregnated by a molten polymeric matrix. The impregnated part is sometimes used as produced, but most often it requires a reheating step before stamping, flow molding or even paint ...
The evolution of microstructural damage during tensile deformation of pure aluminium reinforced with 10 vol.% alumina short fibres is studied by monitoring the evolution of density and Young's modulus as a function of tensile strain. It is found that Young ...
Ultra-High Performance Fibre-Reinforced Concretes (UHPFRC) have high mechanical strengths (fU,c > 150 MPa, fU,t > 6 MPa) and exhibit quasi-strain hardening in tension. Their very low permeability prevents the ingress of detrimental substances. In composite ...
Particle reinforced metal matrix composites are manufactured by high-pressure infiltration. These composites contain roughly 50% by volume of discrete alumina inclusions dispersed homogeneously in a continuous aluminium-based matrix. Three matrices, namely ...
A detailed study of the strain-hardening on a Fe-9Cr-0.1C tempered martensitic model alloy has been undertaken in the temperature range of 77-343 K. The true stress-true strain curves were calculated from tensile test data. In the framework of a phenomenol ...
The resistance as well as strain hardening and softening properties of UHPFRC depend on the type of matrix and mainly on the initial fibre dosage and final fibre distribution and orientation in the cast element. According to the final fibre distribution an ...
