Bridging effects on Mixed Mode delamination: experiments and numerical simulation
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The purpose of this thesis is to characterize internal strains in polymeric materials due to consolidation. In view of this, optical Fiber Bragg Grating sensors are an excellent non-destructive tool for internal strain characterization and damage detection ...
From airplanes to sailboats to bridges, composite materials have become a significant part of our everyday structures. With increasing demand, these materials are pushed to their limits to improve structural efficiency. As a consequence, research and devel ...
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
Homogeneous plane strain compression tests were performed on standard industrial GMT composites using a channel mould at 200oC. A charring and weighting technique was used to determine the fibre concentration after the compression experiments. Experimental ...
The influence of the mould material on the build-up of internal stresses during autoclave cure of carbon fibre composites was investigated using embedded optical fibre Bragg gratings. Unidirectional and cross-ply laminates were cured on four flat moulds: a ...
This study demonstrates the feasibility of using fibre Bragg grating (FBG) sensors to monitor the effects of hygrothermal ageing on the axial strains in a cylindrical epoxy specimen with a centrally located optical glass fibre. A 24 mm long FBG, inscribed ...
A partially embedded long fibre-Bragg grating (FBG) into an epoxy cylindrical specimen is used to monitor the strain distribution evolution along its axis when subjected to subsequent cycles of thermal ageing at 70 and 110 degrees C. Assuming a total volum ...
The increasing needs of extending the lifetime in high-technology fields, such as space and aerospace, rail transport and naval systems, require quality enhancing of the composite materials either from a processing standing point or in the sense of resista ...
Carbon fiber reinforced polymer composites (CFRPs) are inherently multifunctional materials that, in addition to their primary function as a structural material, allow for the sensing and monitoring of in situ damage nucleation and evolution by the measure ...
In this study, two samples of multiwalled carbon nanotubes (MWNT) were synthesized by CVD of acetylene over Fe2Co catalysts supported by CaCO3 using different temperatures. The material produced at 660 °C (MWNT600) shows slightly better performance as evid ...