Bridging effects on Mixed Mode delamination: experiments and numerical simulation
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The increasing needs of extending the lifetime in high-technology fields, such as space and aerospace, rail transport and naval systems, require quality enhancing of the composite materials either from a processing standing point or in the sense of resista ...
From airplanes to sailboats to bridges, composite materials have become a significant part of our everyday structures. With increasing demand, these materials are pushed to their limits to improve structural efficiency. As a consequence, research and devel ...
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
This study demonstrates the feasibility of using fibre Bragg grating (FBG) sensors to monitor the effects of hygrothermal ageing on the axial strains in a cylindrical epoxy specimen with a centrally located optical glass fibre. A 24 mm long FBG, inscribed ...
A partially embedded long fibre-Bragg grating (FBG) into an epoxy cylindrical specimen is used to monitor the strain distribution evolution along its axis when subjected to subsequent cycles of thermal ageing at 70 and 110 degrees C. Assuming a total volum ...
The influence of the mould material on the build-up of internal stresses during autoclave cure of carbon fibre composites was investigated using embedded optical fibre Bragg gratings. Unidirectional and cross-ply laminates were cured on four flat moulds: a ...
Homogeneous plane strain compression tests were performed on standard industrial GMT composites using a channel mould at 200oC. A charring and weighting technique was used to determine the fibre concentration after the compression experiments. Experimental ...
In this study, two samples of multiwalled carbon nanotubes (MWNT) were synthesized by CVD of acetylene over Fe2Co catalysts supported by CaCO3 using different temperatures. The material produced at 660 °C (MWNT600) shows slightly better performance as evid ...
Carbon fiber reinforced polymer composites (CFRPs) are inherently multifunctional materials that, in addition to their primary function as a structural material, allow for the sensing and monitoring of in situ damage nucleation and evolution by the measure ...
The purpose of this thesis is to characterize internal strains in polymeric materials due to consolidation. In view of this, optical Fiber Bragg Grating sensors are an excellent non-destructive tool for internal strain characterization and damage detection ...