Secondary hardening in Co-Ni-Cr super-alloy investigated by Mechanical Spectroscopy
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This work is focussed on a high carbon tool steel used for the production of files. The mechanical properties of the files depend on a hardening thermal treatment that produces a martensitic structure. Thus, the motivation for this work is technological: w ...
Mechanical spectroscopy has been used to study the thermal stress relaxation at the interfaces in magnesium matrix composites. The mechanical loss spectra measured as a function of temperature show an intrinsic component superimposed on transient damping. ...
Due to their high hardness, high melting point and high chemical stability, transition metal nitrides present a great interest for various applications. This work constitutes a contribution to the understanding of the properties of Nb based binary and tern ...
Mechanical spectroscopy measurements were performed on decagonal quasicrystalline Al-Cu-Fe-Cr coatings of three different thicknesses deposited on a mild steel substrate. The mechanical loss spectra indicate that the internal friction is mostly caused by t ...
In the quest of materials for the first wall of the future fusion reactor, it has been shown that oxide dispersion strengthened (ODS) ferritic / martensitic (F/M) steels appear to be promising candidates. The inherent good mechanical properties supported b ...
Dislocation dynamics in a Ni-3(Al, Ta) single-crystal alloy have been studied by means of mechanical spectroscopy at intermediate temperatures, that is in the temperature range of the flow stress anomaly. The mechanical loss of specimens predeformed at 300 ...
Diffusion Brazing (DB) of nickel-based superalloys is a standard joining process widely used in gas turbine industry. The DB technique uses a low melting nickel-based filler material, which contains a rapidly diffusing melting point depressant (MPD) such a ...
The mechanical properties of high volume fraction SiC-particle reinforced Al-based metal matrix composites (MMCs) produced by means of pressurized liquid metal infiltration (squeeze casting) are shown to be triggered by matrix alloying and heat treatment p ...
The formation of twinned dendrites (feathery grains) in binary Al-Zn, Al-Mg, Al-Cu and Al-Ni alloys has been studied in specimens directionally solidified under identical thermal conditions, i.e. G approximate to 100 K cm(-1), v approximate to 1 mm s(-1), ...
Polycrystalline zirconia (3Y-TZP grade) unreinforced and reinforced with multiwalled carbon nanotubes (CNTs) or silicon carbide whiskers (SiCw) or silicon carbide particles (SiCp) have been processed and studied by mechanical spectroscopy with complementar ...
