Optimal voltage control processes in active distribution networks
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The shift towards DC power distribution networks, enabled by power electronics technologies, is changing the nature of electrical power systems. Nowadays, DC power distribution networks can effectively support the high penetration of distributed energy res ...
In AC/DC power distributions networks, power converters are interfacing buses to ensure DC voltage regulation and power distribution. Active front ends are used between AC and DC buses and two typical control schemes that can be implemented are voltage reg ...
Modern power distribution systems are experiencing a large-scale integration of Converter-Interfaced Distributed Energy Resources (CIDERs). Their presence complicates the analysis and mitigation of harmonics, whose creation and propagation may be amplified ...
The thesis presents methods for controlling and planning distributed energy resources (DERs) in active distribution networks (ADNs). It deals with three main challenges: (i) developing and experimentally validating grid-aware real-time control frameworks, ...
Increasing adoption of smart meters and phasor measurement units (PMUs) in power distribution networks are enabling the adoption of data-driven/model-less control schemes to mitigate grid issues such as over/under voltages and power-flow congestions. Howev ...
In spite of the dominance of ac technology for the vast majority of power transmission and distributionsince the late 19th century, the past decades have seen an increase in use of dc electrical power. Inparticular, this has been the case both in high volt ...
The paper focuses on the energy management of a single-phase PV-BESS hybrid distributed system sized for residential applications, using a CHB converter topology as grid interface. The CHB is driven with a hierarchical energy management architecture, with ...
The transmission overload after a disturbance poses significant security risk to the power system. Once it happens, an efficient remedial action must be taken to relieve the line overloads as quickly as possible. The line overload mitigation problem become ...
Energy balance in a power system must be maintained at all times, regardless of the variations in generation and consumption. Large Pumped Hydro Storage Plants (PHSPs) are introduced to the power system to accumulate the excess of energy during the low dem ...
Modular multilevel matrix converter is a type of converter used in medium-voltage ac-ac power conversion. Controlling the energy content of the converter arms is a prerequisite for a proper converter operation, and at the same time a challenging control ta ...
