Deformation behavior of nanoporous polycrystalline silver layers sintered by low temperature bonding: experiment and simulation
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Copper and copper alloys typically experience a sharp loss in ductility at intermediate temperature, induced by grain boundary damage and fracture processes. The susceptibility of the material to intermediate temperature embrittlement is, as a result, stro ...
Daily and seasonal temperature variations induce deflections of bridges. The amplitude of these moments is significant in comparison with the yearly increment caused by irreversible long-term deflections. To improve the quality of the interpretation of mon ...
IABSE Symposium on Large structures and Infrastructures for environmentally constrained and urbanised areas2010
Solders are widely used as interconnect material for the electronic industry. The solder interconnect provides both electrical contact and mechanical connection between the integrated circuit devices and their substrate. Thus solders with good reliability ...
In order to deeply understand the high temperature deformation behaviors of Cu-0.23%Al2O3 (volume fraction) alloy, the changes of flow stress and microstructure for this alloy after deformation at high temperatures were investigated by using the Gleeble-15 ...
Single crystal deformation unveiling the characteristics of crystal glide and the role of defect propagation herein has been a matter of intense research more than 60 years ago. A manifold of different mechanical testing methods and crystal qualities were ...
Size-dependent plastic flow behavior is manifested in nanoindentation, microbending, and pillar-compression experiments and plays a key role in the contact mechanics and friction of rough surfaces. Recent experiments using a hard flat plate to compress sin ...
The tensile behavior of adhesively-bonded double-lap joints composed of pultruded glass fiber-reinforced adherends and an epoxy adhesive was investigated under temperatures ranging between -35°C and 60°C. The load-elongation response was influenced primari ...
In finite element simulations dedicated to the modelling of microstructure evolution, the mesh has to be fine enough to: (i) accurately describe the geometry of the constituents; (ii) capture local strain gradients stemming from the heterogeneity in materi ...
Structural stability issues in planar solid oxide fuel cells arise from the mismatch between the coefficients of thermal expansion of the components. The stress state at operating temperature is the superposition of several contributions, which differ depe ...
In this study, we produced four composite materials with Al-based matrix reinforced by Al-Cu-Fe particles initially of the quasicrystalline (QC) phase. The processing route was a gas-pressure infiltration of QC particle preforms by molten commercial Al and ...
