Deformation behavior of nanoporous polycrystalline silver layers sintered by low temperature bonding: experiment and simulation
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In this study, the hot deformation behavior of an Al-1% Mg alloy with very coarse initial grain size was investigated in terms of flow stress evolution and grain refinement mechanism. The large grain size was employed to study the traditional continuous dy ...
To investigate the effect of recrystallization on hot deformation mechanism of TA15 titanium alloy, rolled sheet and laser-welded tubes before and after recrystallization annealing were tested by uniaxial tensile tests and biaxial gas bulging respectively. ...
The plastic deformation in hcp metals is complex, with the associated dislocation core structures and properties not well understood on many slip planes in most hcp metals. A first step in establishing the dislocation properties is to examine the stable st ...
As part of the recent efforts on renewable energies, energy harvesting by exploiting environmental motions and vibrations to generate electricity is being enthusiastically developed as a novel kind of green energy source. Piezoelectric materials are a logi ...
Microcellular open-cell metal foams with pores of 75 or 400 pm in diameter and made of pure Al or Al-2 wt% Mg are tested in compression. The aluminum foam exhibits a typical smooth plastic flow and a positive strain rate sensitivity, whereas plastic instab ...
In this article, the hot deformation mechanism of a laser-welded near a TA15 Ti-alloy joint was studied by hot tensile tests conducted at temperatures ranging from 800 degrees C to 900 degrees C with strain rates ranging from 1.0 x 10(-1) s(-1) to 1.0 x 10 ...
The studies presented in this thesis aim to extend the current knowledge and understanding of the mechanical behavior of nanocrystalline materials with respect to temperature- and time dependence. Free standing electrodeposited nanocrystalline nickel speci ...
Wells play a key role in the reduction of greenhouse gas emissions. They are not only a critical element in ensuring the permanent trapping of carbon dioxide (CO2) in deep subsurface permeable formations, but they are also being recognized as an important ...
The structure of Al, Ge, Mo-doped Higher Manganese Silicide (HMS) crystals with the general formulas Mn(Si0.99Ge0.01)(1.75), Mn(Si0.995Ge0.005)(1.75) and (Mn0.98Mo0.02)(Si0.98Ge0.02)(1.75)Al-0.01 was investigated by scanning and transmission electr ...
The effects of stress-induced lattice distortions (strain) on the conductivity of Y-doped BaZrO3, a high-temperature proton conductor with key technological applications for sustainable electrochemical energy conversion, are studied. Highly ordered epitaxi ...
