Estimating Non-Conductive Heat Flow Leading to Intra-Permafrost Talik Formation at the Ritigraben Rock Glacier (Western Swiss Alps)
Related publications (77)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Detection of the second harmonic response of magnetic nanostructures to an ac current is shown to be a very sensitive probe of the magnetization reversal process. A temperature oscillation is obtained by Joule heating instead of using a laser as the heat s ...
An Actively Heated Fiber Optics (AHFO) method to estimate soil moisture is tested and the analysis technique improved on. The measurements were performed in a lysimeter uniformly packed with loam soil with variable water content profi les. In the fi rst me ...
Recent JET experiments have been devoted to the study of (He-3)-D plasmas involving radio frequency (RF) heating. This paper starts by discussing the RF heating efficiency theoretically expected in such plasmas, covering both relevant aspects of wave and o ...
The tedious and expensive process of attaching SIL contacts to the sensor edges may be advantageously replaced by soldering wires and cables directly to the sensor contact pads. However, this process is a bit more critical, as applying excessive heat can d ...
Transport measurements are carried out in which temperature oscillation is applied to magnetic nanostructures. Using spin valves, this measurement reveals aspects of the spin transport in non-collinear configurations. In one implementation, an AC voltage i ...
Master sintering curve (MSC) was used as a practical approach to analyse the sintering behavior of an ultrafine alumina powder. Non-isothermal sintering was carried out at three heating rates. The concept of the MSC has been used to investigate the effect ...
In the present study, the sintering behavior of a commercial nano alumina powder with an initial particle size of 100 nm was investigated. The shrinkage response of the powder formed by pressure filtration (PF) during non-isothermal sintering was measured ...
A decomposition model for resin in glass fiber-reinforced polymer composites (GFRP) under elevated and high temperature was derived from chemical kinetics. Kinetic parameters were determined by four different methods using thermal gravimetric data at diffe ...
Dynamic Mechanical Analysis was conducted on a polyurethane adhesive at different constant heating rates up to 100°C, covering the glass transition range. Different storage modulus degradation curves were obtained from different heating rates. The differen ...
Fabrication of sensors and micro-fluidic structures from low temperature co- fired ceramic (LTCC) sheets is a growing interest in the micro-packaging community. Such devices usually have inner cavities, whose production is quite complicated. The most elega ...