Publication

Solid-gap resonators based on PVDF-TrFE

Related publications (32)

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Transversal Spurious Mode Suppression in Ultra-Large-Coupling SH0 Acoustic Resonators on YX36 degrees-Cut Lithium Niobate

Luis Guillermo Villanueva Torrijo, Silvan Stettler

This work reports on the design and fabrication of fundamental shear horizontal (SH0) mode acoustic resonators based on a suspended lithium niobate (LNO) film at 1.04 GHz. Due to the large e16 piezoelectric coefficient of YX36 degrees.-cut LNO, fabricated ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

, ,

This work presents the study of suspended Y-cut Lithium Niobate shear bulk acoustic resonators for wide band filter applications in the frequency range of 3.5-4.5GHz. The resonators consist of a Lithium Niobate film with Aluminum top interdigitated electro ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

, ,

Controlling audible sound requires inherently broadband and subwavelength acoustic solutions, which are to date, crucially missing. This includes current noise absorption methods, such as porous materials or acoustic resonators, which are typically ineffic ...

2023

RF MEMS piezoelectric acoustic resonators are the essential building blocks for RF filters used in RF front-end modules for wireless mobile communication due to their compact size in the MHz-GHz frequency range, high Quality factors and large relative band ...

EPFL2022

Balanceable Coupled Piezoelectric NEMS Resonators

Johannes Mathis Valentin Lemonde

This project aims at designing, fabricating and characterising balanceable coupled NEMS resonators, in order to verify a theoretical model. In the field of sensing, coupled NEMS resonators benefit from an immensely increased sensitivity towards changes in ...

2022

Development of Lamb wave resonators in thin film X-cut lithium niobate

Muhammad Faizan

Microelectromechanical systems (MEMS) is among the most revolutionary technologies of 21st century, with the applications ranging from industrial systems to consumer electronics. Using MEMS in battery-powered wireless devices has long been seen as the evol ...

EPFL2021

Fully Reconfigurable Coupled-Resonator Optical Waveguides (CROWs) with 10 nW Static Power MEMS

Niels Quack, Alain Yuji Takabayashi

We report on fully reconfigurable CROWs with MEMS-tunable waveguides. Resonatorto-resonator and resonator-to-waveguide coupling are fully tunable. Resonance of a resonator is also widely tunable to cover its full FSR. The static power consumption per tunab ...

IEEE2021

Electromagnetic waves under nonstationary conditions, the connection with parity-time symmetry and studies on resonant systems

Theodoros Koutserimpas

In this thesis, the electromagnetic wave propagation is studied in nonstationary-medium scenarios. The electromagnetic fields under material time-modulation are shown to conserve their momentum but not their energy. The mathematical foundations and analysi ...

EPFL2021

Subwavelength Metawaveguide Filters and Metaports

Romain Christophe Rémy Fleury, Maliheh Khatibi Moghaddam

This paper proposes an alternative technique for the design of miniaturized waveguide filters based on locally resonant metamaterials (LRMs). We implement ultrasmall metamaterial filters (metafilters) by exploiting a subwavelength (sub-λ) guiding mechanism ...

2021

This semester project aimed at simulating two approaches for low temperature dependence of resonance frequency of resonators. The first one consists in using AT-cut quartz as the resonator’s material. The AT-cut quartz wafers are made using a 35° angle wit ...

2021