Microstructural Modeling of Early-Age Creep in Hydrating Cement Paste
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The aim of the present thesis is to provide a numerical tool for the mechanical modeling of dynamic failure in concrete. This widely used construction material is characterized by a non-linear failure behavior, which is consequently difficult to describe w ...
Strain Hardening Ultra High Performance Fiber Reinforced Concrete (SH-UHPFRC) were used successfully over the last 8 years in numerous cast in place rehabilitation applications as long lasting waterproofing layers (20 to 30 mm thickness) and, combined with ...
Cement hydrates and their chemically bound water content are sensitive to changes in relative humidity (RH) and temperature. This may cause specific solid volume changes affecting dimensional properties of hydrated cement paste such as shrinkage, swelling ...
This paper describes a novel approach to the quantitative investigation of the impact of varying relative humidity (RH) and temperature on the structure and thermodynamic properties of salts and crystalline cement hydrates in different hydration states (i. ...
The alkali-silica reaction causes long-term degradation in the microstructure of affected concrete as well as macroscopic expansion. In this paper, a micro-mechanical model based upon an explicit representation of the microstructure has been used to simula ...
This paper describes a macroscopic model of the chemo-thermo-poromechanical behaviour of a hydrating cement paste. The hydrating cement is viewed as an open hardening porous medium. The increments of elastic and viscoelastic strain, pore pressure, temperat ...
This paper focuses on the interactions that occur between cement phases during early hydration, especially between the hydration of alite and C(3)A-gypsum. This study shows that alite reaction is accelerated in the presence of gypsum. This acceleration was ...
The modeling platform µic has been extended to study the hydration of cement based systems. It is shown that the hydration kinetics of alite can be described through the implementation of two mechanisms: a solution controlled dissolution (SCD) mechanism fo ...
Thermodynamic modeling is a versatile tool for predicting the chemical composition cement during the hydration of cement. The quality of the thermodynamic modeling depends directly on the quality and completeness of thermodynamic database used. One of the ...
H-1 nuclear magnetic resonance (NMR), supported by a measurement of the degree of hydration using X-ray diffraction, has been used to fully characterise the nano-scale porosity and composition of calcium-silicate-hydrate (C-S-H), the active component of ce ...