Publication

Titanium carbide-carbon porous nanocomposite materials for radioactive ion beam production

Abstract

The Isotope Separator OnLine (ISOL) technique is used at the ISOLDE - Isotope Separator OnLine DEvice facility at CERN, to produce radioactive ion beams for physics research. At CERN protons are accelerated to 1.4 GeV and made to collide with one of two targets located at ISOLDE facility. When the protons collide with the target material, nuclear reactions produce isotopes which are thermalized in the bulk of the target material grains. During irradiation the target is kept at high temperatures (up to 2300 °C) to promote diffusion and effusion of the produced isotopes into an ion source, to produce a radioactive ion beam. Ti-foils targets are currently used at ISOLDE to deliver beams of K, Ca and Sc, however they are operated at temperatures close to their melting point which brings target degradation, through sintering and/or melting which reduces the beam intensities over time. For the past 10 years, nanostructured target materials have been developed and have shown improved release rates of the produced isotopes, due to the short diffusion distances and high porosities. In here a new Ti-based refractory material is developed to replace the currently used Ti-foils. Since nanometric TiC can't be maintained at high temperatures (T>1200 °C) due to sintering, a processing route was developed to produce TiC-C nanocomposites where the carbon allotropes used were either graphite, carbon black or multi wall carbon nanotubes (MWCNT). The developed nanocomposites sinterability was tested up to 1800 °C and they were characterized according to dimensional changes, relative density, mass losses, surface area, TiC particle size and microstructure morphology. All carbon allotropes had a significant effect on the stabilization of the nanometric TiC where the best result was obtained for a 1:1 volume ratio of TiC:carbon black at 1800 °C where TiC crystallite sizes were of 76 nm (from 51 nm in green) and density of 55 %, followed by TiC:MWCNT with TiC of 138 nm (58 % dense). The processing introduced a ZrO2 contamination from the milling media, forming ZrC that solubilizes in the TiC phase, increasing its lattice parameter. TiC sintering kinetics were studied through the master sintering curve and the activation energy determined for sintering, 390 kJ/mol, were close to the ones obtained in the literature. Using the same method, the calculated activation energy for TiC-carbon black was 555 kJ/mol resulting from the carbon which reduces the TiC sintering, reducing its coordination number. The nanocomposites referred (and the TiC) were irradiated and studied in terms of isotope (Be, Na, Mg, K, Sc and Ca) release, where the nanocomposite with the highest isotope released fraction, TiC-carbon black was selected for the final target material. To produce a full target the processing was scaled up and a target prototype was build and tested at ISOLDE. Li, Na and K isotope intensities and release time-structure were measured from the target prototype, where in comparison with Ti-based materials, Na and Li intensities were higher, K were slightly lower and Ca were lower. The target presents an apparently longer release time structure when comparing with standard materials, as seen in other nanomaterial targets, which is likely related with effusion of the isotopes in the material porosity. Furthermore, contrarily to the Ti-foil targets, the obtained intensities were stable over the full operation time. At the end of this thesis suggestions for a future work which include a second iteration of the TiC-C nanocomposite (already developed) and further modeling.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related concepts (33)
Isotope
Isotopes are distinct nuclear species (or nuclides, as technical term) of the same element. They have the same atomic number (number of protons in their nuclei) and position in the periodic table (and hence belong to the same chemical element), but differ in nucleon numbers (mass numbers) due to different numbers of neutrons in their nuclei. While all isotopes of a given element have almost the same chemical properties, they have different atomic masses and physical properties.
Allotropes of carbon
Carbon is capable of forming many allotropes (structurally different forms of the same element) due to its valency. Well-known forms of carbon include diamond and graphite. In recent decades, many more allotropes have been discovered and researched, including ball shapes such as buckminsterfullerene and sheets such as graphene. Larger-scale structures of carbon include nanotubes, nanobuds and nanoribbons. Other unusual forms of carbon exist at very high temperatures or extreme pressures.
Ion source
An ion source is a device that creates atomic and molecular ions. Ion sources are used to form ions for mass spectrometers, optical emission spectrometers, particle accelerators, ion implanters and ion engines. Electron ionization Electron ionization is widely used in mass spectrometry, particularly for organic molecules. The gas phase reaction producing electron ionization is M{} + e^- -> M^{+\bullet}{} + 2e^- where M is the atom or molecule being ionized, e^- is the electron, and M^{+\bullet} is the resulting ion.
Show more
Related publications (51)

The isotopic signature of U(V) during bacterial reduction

Marinella Mazzanti, Rizlan Bernier-Latmani, Margaux Camille Andréa Molinas, Radmila Faizova, Ashley Richards Brown

The two-step electron transfer during bacterial reduction of UVI to UIV is typically accompanied by mass-independent fractionation of the 238U and 235U isotopes, whereby the heavy isotope accumulates in the reduced product. However, the role of the UV inte ...
2024

High power electrostatic beam splitter for a proton beamline

Mike Seidel, Hua Zhang

The High Intensity Proton Accelerator facility (HIPA) delivers a 590 MeV cw (50.6 MHz) proton beam with up to 1.4 MW beam power (2.4 mA) to spallation and meson production targets serving particle physics experiments and material research. The main acceler ...
2024

The role of isotope mass and transport for H-mode access in tritium containing plasmas at JET with ITER-like wall

Haomin Sun, Henri Weisen, Javier García Hernández, Marco Wischmeier, Nicola Vianello, Mikhail Maslov

The required heating power, P-LH, to access the high confinement regime (H-mode) in tritium containing plasmas is investigated in JET with ITER-like wall at a toroidal magnetic field of B-t = 1.8 T and a plasma current of I-p = 1.7 MA. PLH, also referred t ...
IOP Publishing Ltd2023
Show more
Related MOOCs (11)
Plasma Physics: Introduction
Learn the basics of plasma, one of the fundamental states of matter, and the different types of models used to describe it, including fluid and kinetic.
Plasma Physics: Introduction
Learn the basics of plasma, one of the fundamental states of matter, and the different types of models used to describe it, including fluid and kinetic.
Plasma Physics: Applications
Learn about plasma applications from nuclear fusion powering the sun, to making integrated circuits, to generating electricity.
Show more

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.