Hot deformation of a Fe-Mn-Al-C steel susceptible of κ-carbide precipitation
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
A review of the microstructure of irradiated reduced activation ferritic/martensitic steels is presented, with a focus on F82H. Because of its resistance to irradiation induced hardening, swelling and low irradiation induced temperature shift in the ductil ...
Thermal creep tests have been conducted on the EUROFER 97 reduced activation ferritic/martensitic (RAFM) steel and two kinds of oxide dispersion strengthened (ODS) EUROFER 97 steels, which were manufactured using slightly different powder metallurgy techni ...
Titanium aluminium nitride (TiAlN)-based coatings are designed specially for applications where oxidation and wear resistance are primary demands, as in the case of cutting tools. Moreover the coatings are required to be thermally stable as well as have go ...
We present an elastic registration algorithm for the alignment of biological images. Our method combines and extends some of the best techniques available in the context of medical imaging. We express the deformation field as a B-spline model, which allows ...
This work is focussed on a high carbon tool steel used for the production of files. The mechanical properties of the files depend on a hardening thermal treatment that produces a martensitic structure. Thus, the motivation for this work is technological: w ...
During nanoindentation measurements of thin films the formation of cracks within the film as well as of pile-up or sink-in around the indent are known to affect significantly the precision of hardness and Young's modulus values. The crack pattern in brittl ...
The microstructural characterization of two titanium alloys, Ti5Al2.5Sn and Ti6Al4V, was performed. These alloys were selected as representatives of the alpha and alpha + beta titanium families, to investigate their possible application as structural mater ...
We examine, in this work, the integration and high-strain response of piezoresistive thick-film resistors on titanium and titanium alloy, as compared with ferritic stainless steel and the standard alumina substrates. In general, titanium and its alloys are ...
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
AlPdMn quasi-crystalline specimens were deformed at low temperatures using a high-confining-pressure device. The microstructures, observed in each sample by transmission electron microscopy, depend on the deformation temperature and show that plastic defor ...
