Modeling and Analysis for Thermal Management in Gallium Nitride HEMTs Using Microfluidic Cooling
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Nowadays medium voltage conversion systems, like traction and energy distribution systems, aim to increase power density. Volume, weight and material reduction are gaining the market today. Due to the development of new high power semi-conductor devices a ...
On board of satellites traditionally Travelling Wave Tube Amplifiers (TWTAs) together with standard waveguide technology were used for transmitters in telecommunication payload systems. With the advent of Solid State Power Amplifiers (SSPAs) printed circui ...
A comprehensive three-dimensional mathematical model based upon the Abaqus software has been developed for the computation of the thermomechanical state of the solidifying strand during direct chill (DC) casting of rolling sheet ingots and during subsequen ...
To examine relationships between specific energy absorption rate (SAR) and temperature distributions in the human head during radio frequency energy deposition in MRI. ...
Nowadays, efficiency improvement of the modern gas turbines is usually achieved by increasing the pressure ratio which leads to an increase of the gas temperature in the combustion chamber. As a consequence, the temperature conditions imposed on the first ...
This article presents the numerical analysis of temperature increase in the human head resulting from the power dissipation in a cortical implant. A 3–D head phantom with 22 tissue types and 0.2 mm x 0.2 mm x 2 mm resolution has been used in the simulation ...
This paper describes a new method to determine the equivalent transverse heat transfer coefficient between the helium flow in the cable bundle and the flow in the central space of a CICC's with parallel cooling channel. The method is based on the analysis ...
