Development and Testing of Naturally Buckling Steel Braces
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In regions with low to moderate seismicity, unreinforced masonry (URM) is commonly used for the construction of low to mid-rise buildings. When these structures are subjected to seismic loading, the stiff URM walls attract considerable part of the lateral ...
This paper evaluates the effectiveness of single and multi-mode nonlinear static procedures (NSPs) as well as the FEMA P58 simplified approach versus rigorous nonlinear response history analyses (NRHA) for estimating seismic demands of steel special moment ...
The reliable estimation of the seismic performance of structures requires quantifying the aleatory and epistemic uncertainties of the system parameters. This is efficiently achieved for a case study of a four-story steel moment-resisting frame through seve ...
Abstract Performance-based earthquake engineering necessitates the development of reliable nonlinear analysis models that are able to simulate the behavior of structures from the onset of damage through collapse. These models provide engineering demand par ...
A series of seismic tests were conducted on a 1½-bay by 1½-story special steel moment-resisting frame subassembly from the onset of damage through incipient collapse. These tests were conducted using hybrid simulation with substructuring as a mean to demon ...
In many countries reinforced concrete (RC) flat slabs supported on columns is one of the most commonly used structural systems for office and industrial buildings. To increase the lateral stiffness and strength of the structure, RC walls are typically adde ...
Design recommendations for longitudinal reinforcement layouts of reinforced concrete (RC) walls have been derived from plane section analyses. Such an analysis generally favours wall layouts with boundary elements containing large amounts of vertical reinf ...
Spandrel elements in unreinforced brick masonry buildings with timber floors consist of a masonry spandrel supported by either a timber lintel or a masonry arch. When subjected to seismic loading, the force-deformation relationship of such spandrel element ...
Although a wealth of knowledge on the behavior of steel moment frame structures has been gained from past experimental studies, there are only a limited number of system-level tests examining seismic response near collapse. Such experimental data is essent ...
International Association of Earthquake Engineering2017
Existing bridges may have been designed and constructed according to codes without any provisions for seismic design and detailing. Particularly in countries with moderate seismicity, such as Switzerland, modern seismic design standards might have been int ...
