Deformation behavior of nanoporous polycrystalline silver. Part I: Microstructure and mechanical properties
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The strain-hardening behaviour of a tempered martensitic iron-chromium-carbon model was examined in terms of dislocation mechanics. Tensile tests of this body-centered cubic alloy were carried out from 77 up to 293 K. A specific relationship between the fl ...
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
During nanoindentation measurements of thin films the formation of cracks within the film as well as of pile-up or sink-in around the indent are known to affect significantly the precision of hardness and Young's modulus values. The crack pattern in brittl ...
We present an atomistic study of the plastic deformation mechanisms occurring in columnar structures of nanocrystalline Ni, with particular emphasis on the process of dislocation emission form the grain boundaries. The samples are constructed with grain bo ...
Crack patterns of 100-nm-thick silicon oxide coating on polypropylene film subjected to equibiaxial stress loading are studied experimentally. The loading is achieved by means of a bulging cell mounted under an optical microscope with stepwise pressurizati ...
A detailed study of the strain-hardening on a Fe-9Cr-0.1C tempered martensitic model alloy has been undertaken in the temperature range of 77-343 K. The true stress-true strain curves were calculated from tensile test data. In the framework of a phenomenol ...
AlPdMn quasi-crystalline specimens were deformed at low temperatures using a high-confining-pressure device. The microstructures, observed in each sample by transmission electron microscopy, depend on the deformation temperature and show that plastic defor ...
A set of constitutive equations describing the plasticity of semiconductors is compared with the results of mechanical tests. Constant strain-rate compression tests are interrupted before the peak of the initial multiplication yield point, i.e. at the mome ...
Single crystal copper was irradiated with 590 MeV protons to a dose of 0.01 dpa at room temperature. Irradiated and unirradiated tensile samples were deformed and relaxation tests were performed at temperatures between 77 and 293 K. The tests show a strong ...
This thesis explores the processing and properties of microcellular aluminium-based materials produced by replication. It includes the development of a pressure infiltration process for net-shape component production, structural characterization of the foa ...
