Publication

The seismic stability and ductility of steel columns interacting with concrete footings

Related publications (33)

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns

Diego Hernández Fraile

Reinforced concrete flat slabs consist of a continuous, thin concrete plate that rests on a grid of columns. The supporting surface of the columns is very small compared to the floor plan dimensions, leading to concentrations of shear forces near the colum ...

EPFL2024

, ,

Prequalified beam-to-column connections in steel moment resisting frames usually concentrate inelastic deformations in the steel beam ends. As such, nonlinear geo-metric instabilities (i.e., local buckling) may occur in these regions at modest lateral drif ...

Ernst & Sohn2023

Exploring the potential of the critical shear crack theory for reinforced and post-tensioned glass beams: Initial analysis and experiments

Alain Nussbaumer, Pieter Christian Louter, Jagoda Cupac

In the evolution of structural glass beam elements, the requirements for post-fracture load bearing capacity and safe failure behaviour have led to the development of reinforced and post-tensioned beams. Maximum bending capacity in the post-fracture state ...

2023

Development of a road bridge digital twin for simulating traffic loadings

The bridge over the Venoge, built in 1966 and extended in 1997, is a composite bridge located on the highway between Lausanne and Geneva. The aim of this thesis will be to develop a digital twin of this bridge, which consist of a digital representation as ...

2022

, , ,

In flat-slab frames, which are typically designed as secondary seismic structures, the shear failure of the slab around the column (punching failure) is typically the governing failure mode which limits the deformation capacity and can potentially lead to ...

SPRINGER2022

In capacity-designed steel moment resisting frames (MRFs), column base connections feature a strong-base/weak-column design philosophy. Prior studies on fixed-end wide flange steel columns featuring seismically compact cross sections subjected to coupled a ...

EPFL2021

Seismic vulnerability assessment of free-standing massive masonry columns by the 3D Discrete Element Method

Jinwoo Kim

Free-standing masonry column is a recurrent typology of built cultural heritage. Usually raised without seismic design, columns are subject to intense rocking and overturning under strong ground motions. In this paper, a strategy to assess their seismic vu ...

ELSEVIER SCI LTD2021

Seismic performance assessment of new and existing steel structures based on nonlinear static (pushover) analysis necessitates the use of engineering‐oriented models that trace the nonlinear response of structural steel elements under static and cyclic loa ...

2020

Characterization of mortar-timber and timber-timber cyclic friction in timber floor connections of masonry buildings

Katrin Beyer, João Saraiva Esteves Pacheco de Almeida

The seismic performance of buildings depends critically on the stiffness and strength of storey diaphragms. Whilst for modern reinforced concrete or steel structures the connection between floors and lateral resisting members is often assumed as monolithic ...

SPRINGER2020

A Contribution to the Design of Textile Reinforced Concrete Structures

Patrick Lorenzo Valeri

The reduction of green-house gas emissions is one of the global challenges that our society is facing and the production of cement plays a major role because concrete is the most used material worldwide. For every 1000 kg of cement produced, 900 kg of CO2, ...

EPFL2020