Rare Earth and Bimetallic Transition Metal Islands at Surfaces

This thesis reports on the growth and on the magnetic characterization of nanostructures made of 3d-4d transition metals and rare earths. In all the experiments the nanostructures have been grown by atomic beam epitaxy (ABE) in ultra high vacuum conditions (UHV) by performing growth steps with the precise selection of external parameters as: the deposition flux F, the sample deposition temperature Tdep and the sample annealing temperature Tann . The morphological and magnetic properties of the nanostructures have been characterized by performing two in situ measurement techniques in our experimental setup, namely: scanning tunneling microscopy (STM) and magneto-optical Kerr effect (MOKE). The first aims of the thesis consisted in the formation of a supperlattice of rare earth on the graphene moiré pattern induced by the lattice mismatch of a single graphene layer grown on Ir(111) crystal surface. We report the first cluster supperlattice made of rare earths, namely Sm, where clusters nucleate in registry with the moiré pattern, forming a superlattice for deposition temperatures between 80 K and 110 K. Within this temperature range, the Sm supperlattice shows long-range order extending over several tens of nanometers and a cluster size distribution competing with the finest superlattices grown by ABE. Sm cluster spatial order is preserved, up to a coverage of 0.5 ML yielding a mean cluster size of 50 atoms, while for higher coverages coalescence starts. Moreover, Sm clusters with a mean size of 9 atoms are thermally stable up to Tann = 130 K from where on the order is lost and the density reduces progressively by cluster coalescence. Similar experiments carried out for Dy in the same deposition temperature range show the absence of cluster arrays. The second part focused on the enhancement of the MAE of bimetallic nanostructures, grown on Pt(111), having a Co-core by forming atomically sharp interlines and interfaces with three 4d elements, namely Ag, Pd and Rh. Our approach is based on the experimental measurement of the island magnetic susceptibility x(T) and morphology by means of MOKE and STM, respectively, combined with magnetic simulation analysis in order to quantify the different contributions to the island magnetic anisotropy. The monolayer capping for all studied elements contributes positively to the out-of-plane MAE of Co islands, with Pd giving the largest increase in the magnetic hardness. In addition, the capping with two Pd monolayers of pure Co islands maximizes the blocking temperature Tb . However, the lateral decoration of Co islands with all elements contributes negatively to MAE, with the Co/Pd shell giving the smallest effect and Rh the largest. Morphologically, Ag was found to produce a partial decoration of the Co island edges while Rh completely decorates laterally Co islands forming a rim of irregular shape without nucleating on top of Co islands for the used deposition parameters. Simulations of the magnetization reversal process by using coherent rotation (CR) and/or domain wall nucleation and propagation (DW) reversal models including different contributions to the MAE for atoms located at the interface (Ks) and at interline (Kp) and an exchange interaction between Co and 4d transition metals have reproduced the experimental x'(T) and x''(T) curves.

Growth and Magnetism of Nanostructures Investigated by STM, MOKE, and XMCD

Alberto Cavallin

This thesis presents our studies on nanostructures growth and magnetism, mainly based on scanning tunneling microscopy (STM), magneto-optical Kerr effect (MOKE), and x-ray magnetic circular dichroism (XMCD) measurements. In most of these experiments, nanostructures were grown by molecular beam epitaxy on single crystal substrates under ultra high vacuum conditions. Our combined morphological and magnetic investigations aim at an atomic-level description of the nanostructures magnetic properties. In particular, we are searching for strategies to design the smallest ferromagnet with stable magnetization at room temperature to be used in devices such as magnetic random access memories, storage media, and sensors. A critical factor in pursuing this aim is the determination and control of the magnetization reversal mechanism. Different reversal mechanisms may occur in the nanostructures we considered: either all the spins quasi-coherently rotate or a domain wall is nucleated and propagated along the particle. We prepared monolayer-high Co islands on Pt(111) with compact and ramified shape by adjusting the deposition temperatures and coverages for a sequence of deposition and annealing steps. Combining field-dependent magnetization curves and temperature dependent zero-field susceptibility measurements we identify a size- and shape-dependent transition from quasi-coherent to domain wall propagation reversal regimes. In a second study we investigated a system which according to a recent publication presents many of the characteristics desired in bit patterned magnetic media for ultra-high density storage devices. In particular, it was claimed that Co nanoclusters, growing in registry with the GdAu2/Au(111) moiré periodic substrate, and featuring a density of 52 Tera/in2, present out-of-plane remanent magnetization at T = 300 K. At odds with this claim, no perpendicular magnetic anisotropy was found in our combined MOKE and STM study, which shows an in-plane remanent signal appearing only for coalesced islands. A third study is devoted to FeRh, an alloy material which, thanks to its peculiar magnetic phase diagram, has been proposed coupled to FePt for advanced magnetic recording schemes. We present the first observation of low temperature stabilization of the ferromagnetic (FM) phase in FeRh chemically ordered crystals. Nanocrystals measuring 3.3 nm in diameter have B2 structure with alternating atomic Fe and Rh layers. XMCD demonstrates FM alignment of the Fe and Rh magnetic moments of 3 and 1 μB, respectively. In sharp contrast to FeRh bulk and thin films, which show antiferromagnetic iii Abstract (AFM) order below 300 K, the low-temperature FM 3.3 nm nanocrystals are the hallmark of a size-dependent AFM-FM transition temperature. Finally we present our results towards creation by chemical vapor deposition of a “mille-feuille” structure composed of graphene and magnetic nanoclusters. To realize this objective we optimized the cluster size, composition, and annealing temperature to obtain a compromise between graphene syntesis and cluster coalescence. We demonstrate by STM that annealing to T = 720 K in ethylene stabilizes Ir-seeded clusters against diffusion and coalescence, and by Auger Electron Spectroscopy (AES) that Ni-coated clusters can be covered with up to half of the Carbon contained in a graphene layer.

EPFL2013

Propriétés magnétiques de nanostructures de cobalt adsorbées

Nicolas Weiss

This thesis reports results on magnetic properties of supported cobalt nanostructures. The nanostructures were grown on single crystal metal surface by Molecular Beam Epitaxy in an Ultra High Vacuum chamber. Our experimental setup is based on two in situ measurement techniques. The first is the Scanning Tunneling Microscope (STM) allowing to investigate the nanostructure morphology. The second, called Surface Magneto-Optical Kerr Effect (SMOKE), probes the magnetism of the nanostructures. By combining the data obtained with both techniques we were able to investigate the magnetism of 2D nanoparticles down to the atomic level. The first aim of the thesis consisted in disclosing the role played by the differently coordinated atoms in determining the Magnetic Energy Anisotropy in 2D nanostructures. To this purpose, we performed experiments on the Co/Pt(111) system, chosen as a model system since the Pt surface is well known to increase the out-of-plane uniaxial anisotropy as well as the magnetic moment of the Co islands. A preliminary work has been devoted to the growth of the Co islands as a function of the deposition and annealing temperatures. As a result, we learned to grow three different island's shapes : ramified, compact and double-layer islands. We then concentrated on the magnetism of these islands. Due to the nonlinear relationship between perimeter length and surface area, we were able to distinguish the different contributions to the anisotropy energy of surface and perimeter atoms. We found that the magnetic anisotropy in 2D Co nanostructures is predominantly due to the low-coordinated edge atoms, for which the anisotropy energy can be as large as 20 times the bulk value. This finding opens new possibilities to separately tune the anisotropy and moment of nanostructures. To exemplify this, and to illustrate once more the role of perimeter atoms, we produced Co island with a non-magnetic Pt core. As expected, these bimetallic islands have identical anisotropy and lower magnetic moment to their equally shaped pure Co counterpart. The second aim we focused on was the investigation of the magnetic properties of ultra-high density arrays of nanostructures created by self-assembly. We chose Co/Au(788) as a model system since the nanoscopic Co dots were found to have a very narrow size distribution and to be placed onto a lattice which is phase coherent on a macroscopic length scale. Moreover, the array has a density of 26 Tdot/in2 which allows the investigation of inter-particle interaction in ultra high density arrays. We showed that the narrow size distribution of the dots corresponds to an unprecedented narrow Magnetic Anisotropy Energy distribution with 35% width at half of the maximum. Moreover, we demonstrated the weak magnetic coupling between the Co dots despite their high density. In parallel to these fundamental researches, we developed a new experimental setup that will replace the current one. We designed a UHV chamber equipped with a homemade variable temperature STM combined with a SMOKE experiment. A quadrupole, focused on the sample, generates a 0.35 T magnetic field. This field is one order of magnitude larger than the present one and can be uniformly rotated in the plane of the quadrupole. Furthermore, the design of the new chamber allows STM imaging in this magnetic field. In this report, we present the adopted solutions as well as the first tests of the components (STM, SMOKE, cryostat).

EPFL2004

Submonolayer growth of cobalt on metallic and insulating surfaces studied by scanning tunneling microscopy and kinetic Monte-Carlo simulations

Philipp Buluschek

Submonolayer epitaxial growth is obtained by the deposition of less than a complete layer of atoms on a single crystal surface. It is of fundamental interest for industrial applications (e.g. in the semiconductor industry) as well as from the point of view of basic research. For example, it is known that nanometer-sized atomic structures (nanostructures) exhibit remarkable physical and chemical properties which can differ greatly from those of bulk matter. In order to investigate these properties, it is often necessary to create large quantities of well defined and possibly spatially ordered nanostructures. One way to achieve this result is self-organized growth where one deposits atoms on a clean crystalline surface and lets the growth process evolve freely. Here, nanostructures result from the atomic diffusion and aggregation processes taking place at the surface. Understanding the exact nature of these processes is of ongoing interest in the field of nanostructure growth. In this thesis we report about submonolayer growth experiments of the ferromagnetic transition metal cobalt. Cobalt was chosen because it exhibits remarkable magnetic properties. These experiments were performed in an ultra-high vacuum chamber and molecular beam epitaxy was used to grow the nanostructures. Observations of the surface were made using a variable-temperature scanning tunneling microscope (STM). In order to get a better understanding of the atomic processes happening at the surface, we developed two adapted computational simulation methods. Kinetic Monte-Carlo (KMC) simulations were used to get an atomistic picture of the surface while mean field rate equations were integrated numerically to yield cluster densities. We study the growth of cobalt on three different surfaces. By depositing Co on a clean Pt(111) crystal surface, we observe that the platinum surface reconstructs by forming star-shaped partial dislocations for sample temperatures above 180 K (-93°C). We also observe that island densities deviate from predictions of all known models towards higher values for these same temperatures. By simulation we are able to show that insertion of Co into the topmost platinum layer creates a repulsive network of dislocations. We show that these dislocations act as diffusion inhibiting barriers and thus influence the island density by constraining the free movement of atoms at the surface. We also show that the Co dimer and trimer diffuse on Pt(111) before dissociating and are able to extract corresponding activation barriers. We also study the deposition of Co on a Ru(0001) surface which shows a more conventional temperature dependence. By comparing simulation and experiment we extract all relevant diffusion activation barriers and show that at high temperatures the Co dimer and trimer dissociate. Finally, we investigate the growth of Co on the hexagonal boron nitride superlattice which forms on a Rh(111) surface. On this surface Co clusters form three-dimensional hemispherical dots. We show how the substrate corrugation influences diffusion of Co atoms and that clusters up to the size of the pentamer can diffuse. By simulation, we also extract the relevant migrations and desorption barriers.

EPFL2008