A novel mechanical clamp for strengthening of steel members using prestressed CFRP plates
Related publications (71)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The observation of cracks in normally functioning reinforced concrete (RC) structures is expected as the tensile strength of concrete is relatively low. However, one or more of those cracks can start to propagate with increasing crack openings, localizing ...
Most codes of practice adopt a semi probabilistic design approach for the dimensioning and assessment of structures. Accordingly, structural safety is ensured by performing limit state verifications using design values determined with adequately calibrated ...
The fib Model Code 2010 (MC2010) contains a semi-empirical formulation for the local bond-slip relationship for both pull-out and splitting failure modes (derived from short pull-out tests), as well as a semi-empirical formulation of the steel stress that ...
As acknowledged explicitly or implicitly in most of current design codes, a high level of sustained loading has a detrimental effect on the concrete compressive strength. However, its beneficial effect in terms of deformation capacity is neglected in most ...
Traditionally, the concrete strength is measured on cubes or cylinders having normalized dimensions, suitable vibration and curing conditions and their strength is assessed in laboratory under fast loading rates. However, the in-situ strength of structural ...
One of the most instrumental aspects governing the response of structural concrete at ultimate limit state refers to the possibility of developing smeared cracking patterns within a member (associated normally to the presence of sufficient reinforcement fo ...
The forms of U-shaped UHPFRC beams have not been investigated for the highway footbridge. Compared with the traditional section forms, the U-shaped UHPFRC beams can reduce the material consumption under the condition of providing the same bearing capacity. ...
This paper presented a new retrofit system for strengthening the stringer-to-floor-beam double-angle connections in a 92-year-old riveted railway bridge in Switzerland, using prestressed carbon fiber-reinforced polymer (CFRP) rods. The strengthening system ...
ASCE-AMER SOC CIVIL ENGINEERS2021
, , ,
Stringer-to-floor beam web-to-web double-angle connections are among the most fatigue-prone elements in old riveted bridges. These connections are often designed to carry only shear loads. However, in these elements, fatigue damage occurs because of the ou ...
ASCE-AMER SOC CIVIL ENGINEERS2021
, , ,
In this study, the high-cycle fatigue behavior of bridge connections subjected to distortion-induced loadings (generating multiaxial stresses) and strengthened with prestressed elements were experimentally investigated. Thereafter, appropriate critical pla ...