Mixed mode fracture properties of GFRP-adhesive interfaces based on video gauge and acoustic emission measurements from specimens with adherend fibres normal to the interfaces
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Adhesively bonded joints are being used increasingly in civil engineering structures, especially for joints comprising pultruded glass fiber reinforced polymer (GFRP) laminates. The layered material architecture, however, leads to a complex delamination fa ...
The influence of mode mixity on crack growth and failure at a metal/ceramic bimaterial interface is examined within the discrete dislocation (DD) plasticity framework. Plasticity occurs via the motion of dislocations embedded in a linearly elastic medium w ...
In this thesis, a simple law of adhesion with "digital" decohesion is proposed for modeling unilateral contact with adhesion, together with a stable experiment based on an original axisymmetric epoxy-stamp on glass-disc specimen for measuring the relevant ...
Elastoplastic toughness testing of pure aluminium replicated foam is conducted following a J-procedure adapted from the ASTM E1820-08a standard using disc-shaped compact tension specimens. Tests cover a wide range of foam relative density V-m (10-24%). Res ...
This thesis is an exploration of deformation and fracture properties of a novel two-phase α2 + γ Ti46Al8Ta (at.%) alloy featuring a "convoluted" microstructure, produced by partners within a European Union project named IMPRESS. Properties of this alloy ar ...
This work contributes to the fundamental understanding of fracture properties of Particle Reinforced Metal Matrix Composites (PRMMCs), by identifying the key microstructural parameters that control fracture. To this end, PRMMCs with a high volume fraction ...
The nucleation and growth of microcracks in elastic lamellar microstructures is studied numerically. The analyses are carried out within a framework where the continuum is characterized by two constitutive relations: one relating the stress and strain in t ...
Toughness measurements of a Ti-45Al-2N4u-2Nb + 0.8%vol TiB2 alloy with a. near fully lamellar microstructure and a Ti-46Al-8Nb alloy with a convoluted microstructure are performed at 650 degrees C under vacuum according to ASTM Standard E1820. Respective v ...
The fracture behavior of composite rubber particle-toughened polymethylmethacrylate has been investigated over a wide range of test speeds, encompassing impact conditions. When the entanglement density of the matrix was increased and its glass transition t ...
The influence of particle size and particle type on the fracture toughness of aluminium matrix composites is investigated using model composites of 99.99% purity aluminium reinforced with particles of alumina and boron carbide. These composites are produce ...
