Prediction of autogenous shrinkage in fly ash blended cement systems
Related publications (75)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This paper presents the 2D and 3D numerical analysis of pullout tests on steel anchorages in concrete blocks using standard and mixed finite elements. A novel (stabilized) mixed formulation in the variables of total strain ε and displacements u is introduc ...
Through a collaborative research effort between the Ecole Polytechnique Federal de Lausanne and CIDEM a new kind of cementitious binder has been developed based on the synergy between calcined clays and limestone. Industrial trials carried out in Cuba duri ...
This dissertation originates from an investigation about the arising of the modern, German building expertise involving the use of concrete, which develops during the first three quarter of the 19th century against the backdrop of a general modernisation p ...
This paper presents a new approach to model the creep behavior of cement paste at early ages. The creep behavior is simulated by applying a time-varying generalized Maxwell model on the individual elements of a finite-element mesh of a simulated three-dime ...
The results obtained from many previous studies highlight the need for further investigation of the strong connection existing between fresh state and hardened state performance of fiber reinforced concrete. A comprehensive experimental study was conducted ...
Controlled low-strength material (CLSM) mixture design remains a trial-and-error process. A new approach using relative proportioning of the constituent materials instead of prescribed mass contents is proposed. Relative proportions allow for independent a ...
This paper describes the numerical calculation of elastic properties of a simulated microstructure of cement paste from very early age, when most previous models fail to give accurate results. The development of elastic properties of tricalcium silicate pa ...
Due to the enormous volumes produced the production of concrete accounts for around 5-10% of man-made CO2 emissions. Consideration of possible routes to reduce this environmental impact indicates that the use of calcined clays in as supplementary cementiti ...
The reduction of virgin bitumen added to asphalt mixtures containing Reclaimed Asphalt Pavement (RAP) is based on the typical assumption that all the aged binder function in the same way as the virgin binder. However, recent studies conducted by the author ...
H-1 NMR has been used to characterise white Portland cement paste incorporating 10 wt.% of silica fume. Samples were measured sealed throughout the hydration without sample drying. Paste compositions and C-S-H characteristics are calculated based on H-1 NM ...