Scaling laws for the mechanics of loose and cohesive granular materials based on Baxter's sticky hard spheres
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Al-Zn-Mg(-Cu) (AA7xxx) alloys are widely used structural materials owing to their excellent mechanical properties and low corrosion susceptibility. The high strength of these materials is obtained by the formation of secondary phases, e.g. precipitation. T ...
Mechanical testing of materials at the microscales is challenging. It requires delicate procedures not only for producing and handling the specimen to be tested, but also for applying an accurate and controlled force. This endeavor is even more challenging ...
Structural components used in civil engineering applications are often subjected to compressive loads. Unlike the tensile strength of fiber-reinforced polymer (FRP) materials, their compressive strength is resin-dominated, exhibiting lower values and more ...
Wood/timber has been widely used for house and bridge construction. It is a widely available natural material that necessitates low energy for the production, following simple processes. The environmentally friendliness, together with the low cost of raw m ...
In situ rock is often saturated with fluid, the presence of which affects both elastic parameters and inelastic deformation processes. Techniques were developed for testing fluid-saturated porous rock under the limiting conditions of drained (long-term), u ...
Strain Hardening Ultra High Performance Fiber Reinforced Concrete (SH-UHPFRC) were used successfully over the last 8 years in numerous cast in place rehabilitation applications as long lasting waterproofing layers (20 to 30 mm thickness) and, combined with ...
Despite the fact that displacement-based methods are now frequently applied when assessing the seismic performance of unreinforced masonry (URM) structures, the displacement capacity of in-plane loaded URM piers is still estimated from empirical rather tha ...
In this work, clear timber specimens of different lengths with a small cross-sectional area were cut in the transverse direction of timber boards and tested under tensile loading. Regularly positioned and randomly positioned specimens were cut from differe ...
The influence of temperature and moisture activity on the viscoelastic behavior of fluorinated membranes for fuel cell applications was investigated. Uncrosslinked and crosslinked ethylene tetrafluoroethylene (ETFE)-based proton-conducting membranes were p ...
This paper describes the production of "green" microfibrillated cellulose-reinforced polylactide cellular biocomposites using a wet mixing technique combined with super-critical carbon dioxide foaming. The effect of composition on the morphology, density a ...
