Helium effects on irradiation assisted stress corrosion cracking susceptibility of 316L austenitic stainless steel
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Copper and copper alloys typically experience a sharp loss in ductility at intermediate temperature, induced by grain boundary damage and fracture processes. The susceptibility of the material to intermediate temperature embrittlement is, as a result, stro ...
(001)-epitaxial SrTiO3 films were grown on (La, Sr)(Al, Ta)O-3 substrates for investigating the impact of biaxial strain on the antiferrodistortive (AFD) structural phase transition in SrTiO3. The films were fully constrained by the substrates, which resul ...
Uniaxial quasi-static tensile testing on individual nanocrystalline Co nanowires (NWs), synthesized by electrochemical deposition process (EDP) in porous templates, was performed inside a scanning electron microscope (SEM) using a microfabricated tensile s ...
Using a spherical aberration (Cs)-corrected scanning transmission electron microscopy (STEM) and electron energy-loss spectroscopy (EELS), we Investigated a 6 degrees low-angle [001] tilt grain boundary in SrTiO(3). The enhanced spatial resolution of the a ...
In liquid metal spallation targets such as the MEGAPIE (the megawatt pilot experiment) target and the future ADS (accelerator driven system) spallation targets, which utilize liquid lead-bismuth eutectic (LBE) as the target material, liquid metal embrittle ...
In this work we have studied brittle fracture in high-chromium reduced activation tempered martensitic steels foreseen as structural materials for thermonuclear fusion reactors. Developing the adequate materials that can withstand the severe irradiation co ...
Since the end of the last century, Cu damascene integration scheme has been the favoured choice for advanced interconnect technologies. Indeed, due to the lowest Cu bulk resistivity and to it higher resistance to electromigration, performances enhancement ...
An advanced oxide dispersion strengthened (ODS) ferritic steel with very fine oxide particles has been homogeneously implanted with helium under uniaxial tensile stresses from 20 to 250 MPa to a maximum dose of about 0.38 dpa (1650 appm-He) with displaceme ...
This thesis reports on the microstructural analysis of metal ion implanted Polydimethylsiloxane (PDMS), and on the characterization and modeling of its electrical and mechanical properties. Low energy (below 35 keV) metal ion implantation into PDMS forms m ...
We report on an annealing-induced "gate sinking" effect in a 2-nm-thin In0.17Al0.83N/AlN barrier high electron mobility transistor with Ir gate. Investigations by transmission electron microscopy linked the effect to an oxygen containing interlayer between ...
