Orthogonal Tip-to-Tip Nanocapillary Alignment Allows for Easy Detection of Fluorescent Emitters in Femtomolar Concentrations

Here we present the realization of a novel fluorescence detection method based on the electromigration of fluorescent molecules within a nanocapillary combined with the laser excitation through a platinum (Pt)-coated nanocapillary. By using the Pt nanocapillary assisted focusing of a laser beam, we completely remove the background scattering on the tip of the electrophoretic nanocapillary. In this excitation geometry, we demonstrate a 1000-fold sensitivity enhancement (1.0 nM to 1.0 pM) compared to the detection in microcapillaries with epifluorescence illumination and fluorescence spectrophotometry. Due to a significant electroosmotic flow, we observe a decelerating migration of DNA molecules close to the tip of the electrophoretic nanocapillary. The reduced DNA translocation velocity causes a two-step stacking process of molecules in the tip of the nanocapillary and can be used as a way to locally concentrate molecules. The sensitivity of our method is further improved by a continuous electrokinetic injection of DNA molecules followed by sample zone stacking on the tip of the nanocapillary. Concentrations ranging from 0.1 pM to 1.0 fM can be directly observed on the orifice of the electrophoretic nanocapillary. This is a 1000-fold improvement compared to traditional capillary electrophoresis with laser-induced fluorescence.

Hybrid Small Animal Imaging System Combining Magnetic Resonance Imaging with Fluorescence Tomography Using Single Photon Avalanche Diode Detectors

Christof Baltes, Lucio Carrara, Edoardo Charbon, Markus Rudin

The high sensitivity of fluorescence imaging enables the detection of molecular processes in living organisms. However, diffuse light propagation in tissue prevents accurate recovery of tomographic information on fluorophore distribution for structures embedded deeper than 0.5 mm. Combining optical with magnetic resonance imaging (MRI) provides an accurate anatomical reference for fluorescence imaging data and thereby enables the correlation of molecular with high quality structural/ functional information. We describe an integrated system for small animal imaging incorporating a noncontact fluorescence molecular tomography (FMT) system into an MRI detector. By adopting a free laser beam design geometrical constraints imposed by the use of optical fibers could be avoided allowing for flexible fluorescence excitation schemes. Photon detection based on a single-photon avalanche diode array enabled simultaneous FMT/MRI measurements without interference between modalities. In vitro characterization revealed good spatial accuracy of FMT data and accurate quantification of dye concentrations. Feasibility of FMT/MRI was demonstrated in vivo by simultaneous assessment of protease activity and tumor morphology in murine colon cancer xenografts.

Institute of Electrical and Electronics Engineers2011

Nanoscale Magnetometry with Single Fluorescent Nanodiamonds Manipulated in an Anti-Brownian Electrokinetic Trap

Metin Kayci

Studies on single-molecule spectroscopy and nanoscale detection have been remarkably driven by an interest to reveal quantum and conformational states of single particles, the intra-molecular dynamics and their response to physical observables hidden by ensemble level measurements. A straightforward practice used in enhancing the signal from single particles is either to immobilize them on an engineered substrate or to embed them in a solid matrix. Given that the biophysical properties of the host environment introduce new perturbations and the particles will not behave as in their native environment, such approaches are inefficient to reflect the real dynamics. Therefore, recent advances in the field of single-molecule have led to a renewed interest in novel trapping methods, increased efforts into the development of promising tools for extended investigation, and the manipulation of solution-phase bio-molecules in real time. Despite the variety of successful passive trapping techniques, precise manipulation through non-perturbative forces is a big challenge for nano-sized particles. Such techniques either exert high power to the sample or compel special operating conditions disturbing the native environment. Therefore, an active trapping scheme guiding non-perturbative forces can break the trade-off between the particle size and the excreted power. This dissertation presents the development of an active trapping set-up using non-perturbative electrokinetic feedback and demonstrates its performance on nano-sized single particles for aims in biophysics. The essential theme is the engineering aspect of the technique, including the feedback configurations for various fluidic devices, the corresponding particle tracking schemes and the integration of the trapping platform to an integrated circuit pattern for advanced manipulation aims. The second theme is on specialized single fluorescence nanodiamonds (FNDs) as scanning magnetometer in fluidics. The implemented active trapping tool is employed for the manipulation of a rotationally free single FND to detect the localized magnetic field through an optically detected magnetic resonance (ODMR) spectrum. While the laser beam used in particle tracking can serve in optical excitation, an external radio frequency (RF) source is not sufficient to achieve microwave manipulation. Therefore, an RF antenna is designed to transmit the microwave signal to the proximity of the trapping chamber for electron spin resonance (ESR) spectroscopy. A nanostage positioning controller introduces scanning ability to the sample plane, in relative position of the trapped particle, in order to map the distribution of the detected fields over a fluidic volume. As FNDs are also sensitive to many other physical quantities, nanoscale single particle trapping and diamond photonics linkages are realized in this work, which provide an outstanding alternative for detection and imaging in complex fluidic environments that are closed to AFM-like physically supported probes.

EPFL2016

Single molecule detection and fluorescence correlation spectroscopy on surfaces

Kai Hassler

In this thesis a new approach for single molecule detection and analysis is explored. This approach is based on the combination of two well established methods, fluorescence correlation spectroscopy (FCS) and total internal reflection fluorescence microscopy (TIRFM). In contrast to most existing fluorescence spectroscopy techniques, the subject of primary interest in FCS is not the fluorescence intensity itself but the random intensity fluctuation around the mean value. Intensity fluctuations are induced by thermal noise in a minute observation volume, which is in classical FCS the confocal volume of a confocal microscope. E.g. FCS is commonly utilized to investigate diffusion. In this case, diffusing fluorescent molecules entering or leaving the observation volume cause intensity fluctuations, which are analyzed by calculating the temporal autocorrelation of the observed signal. The autocorrelation is a measure for the self-similarity of a signal and contains information about the average fluctuation strength and duration. The confocal observation volume, i.e. the measurement volume that is actually seen by the detector is approximately given by the product of the optical transfer function with the fluorescence exciting intensity distribution of a focused laser beam. To achieve a high signal-to-background ratio a small observation volume is absolutely essential, first of all because the background from e.g. scattered light increases with the size of the observation volume. Second, a small volume assures for a small average number of fluorophores inside the observation volume and therefore for a high fluctuation amplitude i.e. FCS signal. This thesis proposes and discusses an alternative to confocal FCS specially conceived for measurements on surface-bound molecular systems, such as biological receptors or immobilized enzymes. In contrast to confocal FCS, fluorescence is excited within an evanescent field generated by total internal reflection (TIR) of a laser beam at the interface between a microscope coverslip and the sample. This is achieved by focusing the laser beam off-axis at the back focal plane of a high NA oil-immersion objective. The collimated beam that emerges from the objective is incident at an oblique angle at the coverslip-sample interface and totally internal reflected. In contrast to confocal FCS, the generated observation volume is completely confined to the surface and background fluorescence as well as scattered light from the bulk is efficiently suppressed. Our method, called objective-type TIR-FCS in the following, features an increased collection efficiency compared to existing techniques that combine evanescent wave excitation and FCS. Existing techniques use total internal reflection on the surface of a prism to generate an evanescent field. This leads to a configuration where the choice of objectives is limited to air or water-immersion objectives. In our system we use a high NA oil-immersion objective, specially conceived for TIR applications, which collects light efficiently. The collection efficiency is further enhanced by a naturally occurring change of the emission properties of fluorophores close to interfaces between dielectric media. The presence of the interface favors emission into the optically denser medium so that about 60% of the emitted light can be collected. These factors, together with a reduced observation volume lead to a very sensitive method with a high potential for applications in single molecule detection and analysis. The performance of the proposed method was experimentally shown for measurements on molecules subject to Brownian motion and binding to modified coverslips. In particular, it was experimentally shown that objective-type TIR-FCS features high signal-to-background ratio on a single molecule level. In this thesis, concise derivations of analytical expressions for autocorrelation functions for diffusion and most important, the case of ligands reversibly binding to a single and localized binding site are presented. The derived model allows for the quantitative determination of binding rates for a single receptor. We strongly believe that the application of these results in the context of investigations of receptor-ligand binding kinetics will allow for deeper understanding of cellular signaling. Moreover, this thesis discusses the applicability of the proposed method in enzymology. Enzymes, as most proteins are subject to continuous changes of their structure or conformation. These conformational changes are correlated with the function of the enzyme. In the discussed example the enzyme catalyzes an oxidation where the product is fluorescent but the substrate is not. The function of the enzyme i.e. the recurring product formation leads to observable intensity fluctuations. Since function and conformational states are correlated, conformational fluctuations can be investigated by means of FCS as was already shown for confocal FCS. A technique closely related to FCS is fluorescence lifetime spectroscopy (where lifetime refers to the mean lifetime of the electronic excited state). Whereas in FCS the relaxation after random deviations from thermal equilibrium is investigated, relaxation of excited fluorophores towards their electronic ground-state is investigated in lifetime spectroscopy. The technique is used for e.g. discrimination between fluorophores with different lifetimes. Lifetime spectroscopy combined with imaging is used in many domains of life-science, including microarray reading and medical diagnostics. In preliminary work we developed a novel approach to perform lifetime imaging that is based on a multiplexing technique. The proposed method requires no mechanical scanning stage and only a single-point detector. Furthermore, noise is reduced under certain circumstances if the signal is low. Characteristics of this technique as well as advantages and disadvantages are shortly discussed.