Publication

SAMARIS D25b - Guidance for the use of UHPFRC for rehabilitation of concrete highway structures

Related publications (46)

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Bond between reinforcing bars and concrete has been the focus of extensive research over the last century. This is well-justified as the functioning of reinforced concrete intimately depends on the interaction between rebar and concrete, as for example cra ...

EPFL2024

Most codes of practice adopt a semi probabilistic design approach for the dimensioning and assessment of structures. Accordingly, structural safety is ensured by performing limit state verifications using design values determined with adequately calibrated ...

EPFL2024

Low-tech methods for the reuse of reinforced concrete structural elements

Corentin Jean Dominique Fivet, Maléna Bastien Masse, Nicole Widmer, Julie Rachel Devènes

Most of existing buildings are made of concrete, new buildings are being built with it and others are demolished when still in good structural condition. This drives increased demands for raw materials, greenhouse gas emissions, and an accumulation of demo ...

2023

The vertical shortening of tall buildings is not negligible, and it is important to account for these deformations to minimize differential movement and ensure that the finished building is level. Compensation via superelevation is common in reinforced con ...

Springer2023

Influence of sustained loading on resistance and deformation capacity of reinforced concrete members in compression

Aurelio Muttoni, Xhemsi Malja, Miguel Fernández Ruiz

As acknowledged explicitly or implicitly in most of current design codes, a high level of sustained loading has a detrimental effect on the concrete compressive strength. However, its beneficial effect in terms of deformation capacity is neglected in most ...

ERNST & SOHN2022

, ,

The minimum amount of shear reinforcement to be provided in reinforced concrete members has been a topic of debate and research for decades without reaching a consensus. Defining such values is however instrumental to build in an economic manner and to saf ...

ERNST & SOHN2022

, ,

As proposed in several design standards for structural concrete, including Eurocode 2 (EN:1992-1-1:2004) and fib's Model Code 2010, the shear design of slender members with shear reinforcement can be performed by means of consistent models based on suitabl ...

ERNST & SOHN2022

Traditionally, the concrete strength is measured on cubes or cylinders having normalized dimensions, suitable vibration and curing conditions and their strength is assessed in laboratory under fast loading rates. However, the in-situ strength of structural ...

EPFL2021

An interlocking approach for the rebar-to-concrete contact in bond

Aurelio Muttoni, Miguel Fernández Ruiz, Max Tirassa

The bond response of deformed bars in structural concrete is a phenomenon governed, to a large extent, by the rib-to-concrete contact and interaction, with contact forces depending on both material properties and the kinematics between the contact surfaces ...

ICE PUBLISHING2021

Concrete dam AAR numerical modelling and stress relief measures

Davide Giacomo Elia Lamberti

In Switzerland, the peak period for the construction of large hydropower plants dates back than 50 years ago. Only in the '80s a reaction was discovered, which generates internal swelling of the concrete and causes permanent damage to the structures. The r ...

2021