Publication

Early Stages of Precipitation In Aluminum Alloys by First-Principles and Machine-Learning Atomistic Simulations

Daniele Giofré
2018
EPFL thesis
Abstract

Age hardening induced by the formation of (semi)-coherent precipitate phases is crucial for the processing and final properties of the widely used Al-6000 alloys despite the early stages of precipitation are still far from being fully understood. This crucial step in the technology of Al-based alloys is studied by means of multi-scale simulations that include first-principles atomistic modeling, surrogate models based on statistical learning, as well as kinetic Monte Carlo and continuum elasticity models to bridge time and length scales. We begin with an analysis of the energetics of nanometric precipitates of the meta-stable beta'' phases (that play a crucial role in this system) identifying the bulk, elastic strain and interface energies that contribute to the stability of a nucleating cluster. Results show that needle-shape precipitates are unstable to growth even at the smallest size beta'' formula unit. This study made it possible to develop a semi-quantitative classical nucleation theory model, including also elastic strain energy, that captures the trends in precipitate energy versus size and composition. This validates the use of mesoscale models to assess stability and interactions of beta'' precipitates. Studies of smaller 3D clusters also show stability relative to the solid solution state, indicating that the early stages of precipitation may be diffusion-limited. Our results thus point toward the need for a systematic study of the energetics of aggregates in the Guinier-Preston zone regime, and the interactions between those aggregates and vacancies and/or trace elements to understand and fine-tune the behavior of Al-6000 alloys in the early stages of precipitation. To enable full atomistic-level simulations of the whole precipitation sequence of this important alloy system, two Neural Network (NN) potentials have been created by representing just 2-body interactions and including also the 3-body interactions. For the latter, we developed an automatic scheme to determine the most appropriate representation of the structural features of this ternary alloy. Training of the NN uses an extensive database of energies and forces computed using Density Functional Theory, including complex precipitate phases. The NN potentials accurately reproduce most of the properties of pure Al which are relevant to the mechanical behavior and formation energies of small solute clusters and precipitates that are required for modeling the precipitation and mechanical strengthening. This success not only enables future detailed studies of Al-Mg-Si but also highlights the ability of machine learning methods to generate useful potentials in complex alloy systems. Finally, we used this NN potential to implement a kinetic Monte Carlo scheme to study the formation of pre-precipitation clusters. While quantitative accuracy will probably require further refinement of its training set, to achieve a more complete description of the interactions between solute atoms and vacancies, we could already observe some of the key mechanisms the determine the ultra-fast formation of aggregates. This work lays the foundations for a thorough investigation of the behavior of Al-6000 alloys over time and size scales that are technologically relevant and demonstrates a combination of atomistic modeling techniques that could be adapted to a large number of similar metallic alloys.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related concepts (34)
Aluminium alloy
An aluminium alloy (or aluminum alloy; see spelling differences) is an alloy in which aluminium (Al) is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon, tin, nickel and zinc. There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided into the categories heat-treatable and non-heat-treatable. About 85% of aluminium is used for wrought products, for example rolled plate, foils and extrusions.
Precipitation hardening
Precipitation hardening, also called age hardening or particle hardening, is a heat treatment technique used to increase the yield strength of malleable materials, including most structural alloys of aluminium, magnesium, nickel, titanium, and some steels, stainless steels, and duplex stainless steel. In superalloys, it is known to cause yield strength anomaly providing excellent high-temperature strength. Precipitation hardening relies on changes in solid solubility with temperature to produce fine particles of an impurity phase, which impede the movement of dislocations, or defects in a crystal's lattice.
Superalloy
A superalloy, or high-performance alloy, is an alloy with the ability to operate at a high fraction of its melting point. Key characteristics of a superalloy include mechanical strength, thermal creep deformation resistance, surface stability, and corrosion and oxidation resistance. The crystal structure is typically face-centered cubic (FCC) austenitic. Examples of such alloys are Hastelloy, Inconel, Waspaloy, Rene alloys, Incoloy, MP98T, TMS alloys, and CMSX single crystal alloys.
Show more
Related publications (102)

Solute-strengthening in metal alloys with short-range order

William Curtin, Shankha Nag

Recent surging interest in strengthening of High Entropy Alloys (HEAs) with possible chemical ordering motivates the development of new theory. Here, an existing theory for random alloys that accounts for solute-dislocation and solute–solute interactions i ...
2024

Machine learning for metallurgy IV: A neural network potential for Al-Cu-Mg and Al-Cu-Mg-Zn

William Curtin, Daniel John Gilles Marchand

Most metallurgical properties, e.g., dislocation propagation, precipitate formation, can only be fully understood atomistically but most phenomena and quantities of interest cannot be measured experimentally. Accurate simulation methods are essential but f ...
AMER PHYSICAL SOC2022

Micro-addition of Fe in highly alloyed Cu-Ti alloys to improve both formability and strength

Roland Logé, Cyril Cayron, Baptiste Thomas Jean Rouxel

Cu-Be alloys provide excellent electrical and mechanical properties, but present serious health hazards during manufacturing. Among alternative alloys, the Cu-Ti system has the highest yield strength; however, Ti cannot be easily solutionized at concentrat ...
ELSEVIER SCI LTD2022
Show more
Related MOOCs (20)
Neuronal Dynamics - Computational Neuroscience of Single Neurons
The activity of neurons in the brain and the code used by these neurons is described by mathematical neuron models at different levels of detail.
Neuronal Dynamics - Computational Neuroscience of Single Neurons
The activity of neurons in the brain and the code used by these neurons is described by mathematical neuron models at different levels of detail.
Show more

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.