Photoinduced Charge Transfer Dynamics in Blue-Coloured Diketopyrrolopyrrole (DPP) Dye-Sensitized Solar Cells

The inception of push-pull organic dyes utilizing the donor-pi conjugated bridge-acceptor (D-pi-A) motif has created a paradigm shift in the design of efficient nanocrystalline dye-sensitized solar cells (DSSCs), offering control over aesthetic and performance properties. Especially, sensitizer embedding diketopyrrolopyrrole (DPP) core for solar cell application has attracted great attention because of its promising performance and aesthetic blue coloration. The core of this thesis is devoted to the understanding of the exact mechanism and dynamics of the charge separation in DPP-sensitized solar cells, where a number of photoinduced processes coexist and are kinetically entangled. To understand this complex combination of processes, fundamental backgrounds are introduced in the first chapter. Next, detailed descriptions of the instruments employed in this study are provided in the second chapter. In Chapter 3, detailed intermolecular interactions of D-pi-A DPP-based dye molecules on the redox-inactive Al2O3 is investigated at the exciton level. The results evidence that charge transfer (CT) excitons formed between neighboring dyes are involved in the lateral interaction. And this arises from the ordered molecular configuration on the surface due to the interaction between electron-rich donor and relatively electron-poor DPP core in the neighboring dye. On the other hand, when the donor is deprived of DPP dye, excimer-like excited states are formed upon photoexcita-tion and involved in the interaction due to pi-pi interaction. This suggests that the donor moiety plays a critical role in intermolecular interactions. In Chapter 4, the investigation is performed on how the lateral interaction studied in Chapter 3 affects the electron injection process of DPP-sensitized TiO2 films, by comparing the dynamics of donor-installed and donor-deprived DPP dye sensitizers. It is found that lateral intermolecular interactions exist even on TiO2, and takes place during several picoseconds. It is also found that this causes the charge injection process to become inefficient, especially in donor-deprived dye, because the delayed injection rate is slower than that of the lateral interaction. From these observations, it is suggested that the intermolecular interaction is another factor that can have a decisive influence on interfacial CT processes in DSSC. In Chapter 5, based on previous observations, we explore the reason why asymmetric DPP dye sensitizer offers better photovoltaic performances compared to that of the symmetric DPP one. An enhanced J-aggregates formation of symmetric thienyl-DPP (ThDPP) dye on TiO2 is observed com-pared to the case of asymmetric phenyl-DPP-thienyl (PhDPPTh) dye sensitizer. We find that these J-aggregates also inject electron upon excitation, and their oxidized form interacts with surrounding charge species. Moreover, their injection becomes inefficient as light intensity enhances. This result is in line with the nonlinear photocurrent dynamics of symmetric DPP dye sensitizer, which is be-lieved to the cause of device inefficiency. Through the studies carried out within this thesis using DPP dye sensitizers, a step-by-step understanding of the charge transfer mechanisms and in particular their dependence upon lateral in-termolecular electronic interactions is constructed. We hope that they will open new paths for further optimizations of the efficiency of DSSCs.

Strategies to Optimizing Dye-Sensitized Solar Cells

Sophie Wenger

Dye-sensitized solar cells (DSCs) constitute a novel class of hybrid organic-inorganic solar cells. At the heart of the device is a mesoporous film of titanium dioxide (TiO2) nanoparticles, which are coated with a monolayer of dye sensitive to the visible region of the solar spectrum. The role of the dye is similar to the role of chlorophyll in plants; it harvests solar light and transfers the energy via electron transfer to a suitable material (here TiO2) to produce electricity — as opposed to chemical energy in plants. DSCs are fabricated of abundant and cheap materials using inexpensive processes (e.g. screen-printing) and are likely to be a significant contributor to the future commercial photovoltaic technology portfolio. The work conducted during this thesis aimed at optimizing the DSC using three different strategies: The use of versatile organic sensitizers for stable and efficient DSCs, the study of tandem device architectures in combination with other solar cells to harvest a larger fraction of the solar spectrum, and the development of a validated optoelectric model of the DSC. Organic donor-π-acceptor dyes are an interesting alternative to the standard metal-organic complexes used in DSCs. Efficient photovoltaic conversion and stable performance could be demonstrated with three classes of donor systems, namely diphenylamine, difluorenylaminophenyl, and π-extended tetrathiafulvalene. The highest conversion efficiencies were obtained with a difluorenylaminophenyl donor system (η = 8.3 % with a volatile electrolyte and η = 7.6 % with a solvent-free ionic liquid, which was a new record for organic dyes at the time of publication). Surprisingly, efficient regeneration of the oxidized dye by the I-/I3- redox mediator was found with the π-extended tetrathiafulvalene system, even though the thermodynamic driving force was as low as 150 mV. So far driving forces of 300-500 mV had been regarded as necessary for efficient regeneration of the dye cation. Also, important structure-property relationships pertaining to the recombination of electrons with the electrolyte and to the stability of the device could be identified (i.e. effect of linear vs. branched structure, linker length, and moieties used). The power conversion efficiency of solar cells can be extended beyond the limit for a single cell (∼ 30 %) by using multiple cells with different optical gaps in a tandem device. DSCs and chalcopyrite Cu(In,Ga)Se2 (CIGS) solar cells have complementary optical gaps and are thus suitable systems for integration in a tandem device. It was shown that a monolithic DSC/CIGS tandem device has the potential for increased efficiency over a mechanically stacked device due to increased light transmission to the bottom cell, and a monolithic DSC/CIGS device with an initial efficiency of η = 12.2 % was demonstrated. The degradation of the devices — induced by the corrosion of the CIGS cell in contact with the I-/I3- redox mediator — could be retarded with a protective thin conformal ZnO/TiO2 oxide layer coated on the CIGS cell by atomic layer deposition. Finally, an experimentally validated optical and electrical model of the DSC has been developed to assist the optimization process, which is predominantly conducted by empirical means in the DSC research community. The optical model allows to accurately calculate the internal quantum efficiency of devices, i.e. the ratio of extracted electrons to absorbed photons by the dye, a crucial and so far difficult to determine characteristic. Intrinsic parameters — like injection efficiency, electron diffusion length, or distribution of trap states in the TiO2 — can be extracted from experimental steady-state and time-dependent data with the electric model. The model allows to make a comprehensive and quantitative loss analysis of the different optical and electric loss channels in the DSC. The model has been implemented with a graphical user interface for straightforward usage. All three optimization strategies — organic dyes, tandem architecture, and device modeling — developed during this thesis make a valuable contribution to the development and commercialization of inexpensive and high efficiency DSCs. They enable a comprehensive view of the system and pave the way for a systematic analysis and reduction of losses, which has been the ultimate route to success for several established photovoltaic technologies.

EPFL2010

Novel organic dyes for enhanced red to near IR response in dye sensitised solar cells

The aim of this work was to develop new, organic dyes, capable of harvesting photons in the red to near-IR region of the spectrum. A series of squaraine and tricarbocyanine dyes were produced and characterised and their optical and redox properties studied. The results of initial photovoltaic tests, followed by optimisations of cell performance, have also been presented. These clearly demonstrate the effectiveness of these dyes in solar cells. A total of 12 new squaraine dyes were successfully synthesised, seven of which were tested in "dye-sensitised" solar cells. The efficiencies ranged from 1.2%-3.7%, for the best dye [B1]. It was concluded that enhanced performance could be achieved in the presence of chenodeoxycholic acid (CDCA) and tetrabutylpyridine (TBP). These additives both help to prevent aggregation and increase the cell potential, limiting charge collection losses and enhancing performance. Three new tricarbocyanine dyes were also synthesised, two of which were used in solar cells. Unfortunately, due to the interaction of [B12] with the electrolyte, the dye proved to be unstable, as both the absorption maxima in UV-vis and fluorescence emission wavelengths were shifted to higher energies. Thus, the red response of the dye was significantly reduced and photovoltaic performance hindered. A limited photo-response of [B14] was also seen, although this dye appeared to be very stable in the presence of the electrolyte. To deduce the possible reasons for the poor performance of these dyes, their optical and electrochemical properties were investigated. Thus, cyclic voltametry was employed to identify the redox potentials of the dyes and their charge injection and recombination dynamics were studied through nanosecond time-resolved transient laser spectroscopy. It was concluded that the dyes theoretically possess the ideal characteristics for solar cell function and that the problem of [B14] lay in the purity of the dye. [B14] proved to be very difficult to purify as the dye was unstable in solution and decomposed on the columns employed in chromatography. Fortunately the dye appeared to be stable in the presence of an electrolyte when adsorbed on TiO2. The dye gave an IPCE of 12% between 800 – 900nm, which is particularly impressive, especially if the purity of the dye is considered. A new method of purification must be found however, if photovoltaic performance is to be enhanced. Finally, the effects of a compact blocking layer on device performance were studied. It was clearly demonstrated that a compact layer was essential. This was investigated and a relationship between the structure of the dye and the necessity of the blocking layer was established.

EPFL2006

Solid-State Sensitized Heterojunction Solar Cells

Soo-Jin Moon

Dye-sensitized solar cells (DSCs) are considered as an emerging technology in order to replace conventional silicon solar cells or thin film solar cells such as amorphous silicon, CIGS, and CdTe. Liquid electrolytes containing iodide/triiodide redox couple have a durability problem due to the corrosion of metal contacts. In order to improve the long-term stability of DSC device it is important to find an alternate efficient redox couple. In search of this we are using 2,2',7,7'-tetrakis-(N,N-di-methoxyphenylamine)- 9,9'-spirobifluorene (spiro-OMeTAD) as a hole transport material for solid-state dye-sensitized solar cells (SSDSCs). In comparison to the liquid electrolytes the efficiencies of SSDSCs are inferior, they are around only 30% of the efficiencies obtained with the liquid electrolytes. In optimizing the device performance and stability of SSDSCs, various light harvesting systems are employed to enhance a photovoltaic performance and investigated their properties in SSDSCs. In SSDSCs we use thin TiO2 films to avoid the pore-filling problem of HTM. Hence it is critical to use high molar extinction coefficient dyes with an efficient light harvesting capability for SSDSCs. Representative ruthenium sensitizers such as N719 or Z907 have shown good and stable performances in liquid electrolyte-based DSCs. However, their performances are low in SSDSCs due to insufficient light harvesting in thin mesoporous TiO2 films. A new family of heteroleptic polypyridyl ruthenium sensitizers having thiophene units was employed to increase the light harvesting capabilities and their applicability in SSDSCs. These new dyes could improve the absorbed photon-to-current conversion efficiencies as well as power conversion efficiencies due to their high molar extinction coefficients. The thiophene units of the ancillary ligands not only enhanced molar extinction coefficients but also augmented electron lifetime in the devices. In general, ruthenium sensitizers possess lower molar extinction coefficients compared to organic dyes. In order to increase the molar extinction coefficients and bathochromic shift in the absorption spectra of organic dyes, we applied donor-acceptor concept in organic dyes with different π-conjugation bridges. Consequently, we achieved 6 % power conversion efficiency at AM 1.5G solar irradiation (100 mW/cm2) in a solid-state dye-sensitized solar cell. Transient photovoltage and photocurrent decay measurements showed that the enhanced performance of this device was ascribe to higher charge collection efficiency over a wider potential range. We also examined near infrared absorbing dyes and they could be employed to different device architectures such as tandem cells, Förster Resonance Energy Transfer, or co-sensitization to substantiate panchromatic response. Another interesting type of sensitizers is semiconductor or quantum dots due to their unique properties. However, the efficiency of the semiconductor-sensitized solar cells was only 1-2 % range. Recently, much improved efficiencies were reported with Sb2S3-sensitized cells using different hole conductors. The Sb2S3-sensitized cells with spiro-OMeTAD demonstrated a very high incident photon-to-conversion efficiency (IPCE) of 90 %. This excellent result shows that the semiconductor sensitizers are promising candidate as light absorbers for SSDSCs. Most of the standard ruthenium and organic dyes have the limited absorption in near infrared region of the solar spectrum. Porphyrin sensitizers possess strong absorptions in the visible and near infrared region and they have good chemical, photochemical and thermal stability. However, the power conversion efficiency of SSDSCs devices using a novel D-π-A porphyrin we reached only 1.6 %. In order to improve a cell performance, porphyrin was co-sensitized with an organic dye to increase light harvesting capability in the green wavelength region as well as to reduce the dye aggregation. Instead of spiro-OMeTAD a polymer hole conductor was applied, which had intense spectral response in the visible region. Interestingly, in this system the polymer hole conductor showed dual functions, as a light absorber and a hole transporter. This hybrid solar cell exhibited a clear panchromatic response and improved the power conversion efficiency of device compared to the cell with spiro-OMeTAD.

EPFL2011