Tribological response of multilayered gold nickel coating deposited on fine turned surfaces
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Electrochemical and friction measurements during unidirectional sliding tests are used to monitor and to evaluate the tribocorrosion behavior of a passivating material. Tribocorrosion is the interplay between chemical, electrochemical, and mechanical proce ...
Focused electron- and ion-beam induced processing are well established techniques for local deposition and etching that rely on decomposition of precursor molecules by irradiation. These high-resolution nanostructuring techniques have various applications ...
This manuscript reports a new strategy to guide the chemical solution deposition of thin, microstructured metal films. The proposed strategy is based on the use of poly(2-(methacryloyloxy)ethyl ammonium chloride) (PMETAC) brushes grown via surface-initiate ...
Degradation observed on long term stack tests may be explained in part by microstructural changes of the electrodes. Particularly at the anode side, the coarsening of nickel particles will affect its performances. Increasing the metal particle size will fi ...
Topographic nanostructuring of surfaces is a promising concept, in particular to improve the bio-integration of titanium orthopedic implants. In this context, a new method for the nanostructuring of anodised titanium surfaces was developed. Ordered topogra ...
We show that the rod-shaped Tobacco mosaic virus (TMV) can be coated with the wide band gap semiconductor zinc oxide by electroless deposition under mild reaction conditions. The process involves pretreatment with aqueous Pd(II), followed by nucleation of ...
We investigated the coating of glass-supported gold nanostructures with polyelectrolyte multilayers. To achieve selective coating of either the metal or the glass, thiol and silane monolayers with different functionalities were used. Self-assembled monolay ...
Be has a tendency to form particularly brittle intermetallics with Cu and a lot of other elements. Insertion of interlayers may be a solution to increase bond quality. Ion Beam Analysis (IBA) methods have been considered together with scanning electron mic ...
Two different methods for estimating the corrosion resistance of low alloy stainless steels are compared: critical pitting temperature according to a modified ASTM G150 with a low chloride concentration (0.1M), and pitting potentials from polarisation curv ...
Microstructure, chemical and phase composition of the hard layer formed on the Ti-6Al-4V alloy after duplex surface treatment were investigated by light microscopy (LM), X-ray diffraction (XRD) and analytical scanning, transmission and scanning transmissio ...
