Tribological response of multilayered gold nickel coating deposited on fine turned surfaces
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Topographic nanostructuring of surfaces is a promising concept, in particular to improve the bio-integration of titanium orthopedic implants. In this context, a new method for the nanostructuring of anodised titanium surfaces was developed. Ordered topogra ...
We show that the rod-shaped Tobacco mosaic virus (TMV) can be coated with the wide band gap semiconductor zinc oxide by electroless deposition under mild reaction conditions. The process involves pretreatment with aqueous Pd(II), followed by nucleation of ...
Focused electron- and ion-beam induced processing are well established techniques for local deposition and etching that rely on decomposition of precursor molecules by irradiation. These high-resolution nanostructuring techniques have various applications ...
This manuscript reports a new strategy to guide the chemical solution deposition of thin, microstructured metal films. The proposed strategy is based on the use of poly(2-(methacryloyloxy)ethyl ammonium chloride) (PMETAC) brushes grown via surface-initiate ...
Electrochemical and friction measurements during unidirectional sliding tests are used to monitor and to evaluate the tribocorrosion behavior of a passivating material. Tribocorrosion is the interplay between chemical, electrochemical, and mechanical proce ...
We investigated the coating of glass-supported gold nanostructures with polyelectrolyte multilayers. To achieve selective coating of either the metal or the glass, thiol and silane monolayers with different functionalities were used. Self-assembled monolay ...
Two different methods for estimating the corrosion resistance of low alloy stainless steels are compared: critical pitting temperature according to a modified ASTM G150 with a low chloride concentration (0.1M), and pitting potentials from polarisation curv ...
Be has a tendency to form particularly brittle intermetallics with Cu and a lot of other elements. Insertion of interlayers may be a solution to increase bond quality. Ion Beam Analysis (IBA) methods have been considered together with scanning electron mic ...
Degradation observed on long term stack tests may be explained in part by microstructural changes of the electrodes. Particularly at the anode side, the coarsening of nickel particles will affect its performances. Increasing the metal particle size will fi ...
Microstructure, chemical and phase composition of the hard layer formed on the Ti-6Al-4V alloy after duplex surface treatment were investigated by light microscopy (LM), X-ray diffraction (XRD) and analytical scanning, transmission and scanning transmissio ...
