The Deformation Capacity of Lap Splices in RC Walls: From Experimental Testing to Numerical Modelling
Related publications (51)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The present research represents a theoretical and experimental contribution to the understanding of the structural behaviour of elements made of ultra-high performance fibre-reinforced concrete (UHPFRC). UHPFRC is investigated as an advanced cementitious m ...
Existing bridges may have been designed and constructed according to codes without any provisions for seismic design and detailing. Particularly in countries with moderate seismicity, such as Switzerland, modern seismic design standards might have been int ...
The authors report on punching tests with full-scale slab specimens. The objective was to investigate the influence of several parameters on the punching strength and rotation capacity of flat slabs ...
The contributions assembled in the present volume proceed from the lectures of the 2009 ALERT Geomaterials School devoted to the Failure in the multiphase geomaterials. The multiphase behaviour of geomaterials used to be mainly considered from the point of ...
A thorough four-step performance-based seismic evaluation for a six-story unreinforced masonry building is conducted. Incremental dynamic analysis is carried out using the applied element method to take advantage of its ability to simulate progressive coll ...
This article presents the test setup of two quasi-static cyclic tests on U-shaped walls under horizontal diagonal loading recently performed at EPF Lausanne. The results of the first test are discussed in terms of global behaviour: failure mechanisms and f ...
Assessing the strength of existing structures has become a major issue for structural engineers. Such analyses are often performed after changes of use of the structure or due to new design codes requirements. This is particularly relevant with respect to ...
In unreinforced masonry (URM) walls the vertical piers are connected by horizontal spandrel elements. Numerical simulations have shown that spandrels influence significantly the global wall behaviour under seismic loading. Despite their importance, experim ...
In many unreinforced masonry (URM) buildings reinforced concrete (RC) ring beams are introduced at each storey in order to maintain the integrity of the building when subjected to seismic loading. Such ring beams also contribute to the in-plane resistance ...
During severe seismic events the base of unanchored steel liquid-storage tanks can uplift, causing large inelastic rotation demands at the shell-to-base connections and large multi-axial stresses (radial tension and circumferential compression) in the tank ...