A Variable Structure Control Scheme Proposal for the Tokamak a Configuration Variable
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The long term European materials R&D programme is mainly focused on the development of the following DEMO relevant materials: structural (RAFM steel called EUROFER), plasma facing (W alloy), breeder and neutron multiplier (Pb-17Li, Li4SiO4, Li2TiO3 and Be) ...
The deuterium and helium dynamics in the plasma and subdivertor regions of JET are compared during a sequence of similar ohmic and ICRH pulses where 100% He gas is injected into the JET vacuum vessel, whose graphite walls were previously saturated with deu ...
The large physical size of the JET tokamak, its heating systems and diagnostics, and its capability to operate with full deuterium-tritium (D-T) plasmas, including high-power tritium neutral beam injection (NBI), give it unique possibilities in fast partic ...
In this paper, recent results on the physics of neoclassical tearing modes (NTMs) achieved on ASDEX Upgrade are reported. A scaling law for NTM decay has been found, showing that the minimum local bootstrap current density required for mode growth is propo ...
Experiments are conducted on JET to assess the potential for plasma diagnostic spectroscopy and mode stability control, of Alfven eigenmodes (AEs), excited by external antennas and by energetic particles. Information on the time evolution of the nonmonoton ...
An analysis of the effect of magnetic geometry on heat flux in a wide range of single null diverted discharge configurations with 1.5 < κ(95) < 2.2, 0.2 < δ(95) < 0.45 suggests that elongation is beneficial for confinement. If heat diffusivitie ...
Small specimen test technology (SSTT) has enabled, the development of fusion materials by efficiently using available irradiation volumes. The technology has also evolved in anticipation of the construction and operation of a high-energy neutron source for ...
Examples of significant fusion materials R&D accomplishments are summarized for three general categories: (1) Fundamental studies of radiation-induced defects and their effects on material properties, (2) development of improved materials, and (3) developm ...
The development of high-power gyrotrons (118 GHz, 140 GHz) in continuous-wave (CW) operation for heating nuclear fusion plasmas has been in progress for several years in a joint collaboration between different European research institutes and industrial pa ...
